NanoPi NEO H3 Quad-Core Development Board - 256MB RAM

NanoPi NEO H3 Quad-Core Development Board - 256MB RAM is a compact ARM development board with integrated CPU, GPU, memory, storage, and expansion interfaces. It is built around the H3 quad-core Cortex-A7 processor and includes 256MB DDR3 RAM. The board supports 10/100M Ethernet, USB connectivity, and GPIO expansion. It also provides a micro SD slot for storage and status LEDs for power and operation. This NanoPi NEO board supports u-boot and UbuntuCore.

Features of NanoPi NEO H3 Quad-Core Development Board - 256MB RAM

• H3 quad-core Cortex-A7 processor
• 256MB DDR3 RAM
• Mali400MP2 GPU
• 10/100M Ethernet
• Micro SD storage slot
• GPIO expansion headers
• Power and status LEDs
• u-boot and UbuntuCore support

Specifications of NanoPi NEO H3 Quad-Core Development Board - 256MB RAM

• Processor: H3, Quad-core Cortex-A7 @ 1.2GHz
• GPU: Mali400MP2 @ 600MHz
• GPU support: OpenGL ES2.0
• Memory: DDR3 RAM, 256MB
• Storage: Micro SD slot
• Network: 10 / 100M Ethernet
• USB Host: 1
• Micro USB OTG: 1 port
• USB via pins: 2
• Micro USB: power and OTG support
• Debug serial: 4-pin, 2.54 mm pitch pin header
• Expansion header: 24-pin header for I2C, 2x UART, SPI, PWM, and power signals
• Expansion header: 12-pin header with 2 USB, IR pin, microphone, and Line OUT signals
• Power and status LEDs
• Dimensions: 40 x 40 mm
• Weight: 7.5g
• Power supply: 5V/2A through micro USB port or VDD pin on the header
• Operating system: u-boot, UbuntuCore

How to Use NanoPi NEO H3 Quad-Core Development Board - 256MB RAM

1. Connect power through the micro USB port or the VDD pin on the header.
2. Install storage media in the micro SD slot.
3. Use the USB, Ethernet, GPIO, and serial headers as required by your setup.

More Info

• The board includes a 4-pin debug serial interface with 2.54 mm pitch.
• The expansion headers provide access to UART, SPI, I2C, PWM, IR, microphone, and Line OUT signals.