Orange Pi Zero Plus 2 (H5) Development Board

Description 
Orange Pi Zero Plus2 Quad Core Cortex A53 Wifi Board [512MB RAM] is a full computer on a small single board, which consist of CPU, GPU, HDD, RAM, Wi-Fi, Microphone, Ports, and also operating systems to be placed in educational robot, copters, toys, etc., to command and control things. Orange Pi is an open-source computer maker which makes open-source single-board computers with orange Pi brand. Such a single-board computer can be run under Android, Ubuntu, Debian, Raspbian Image. Orange Pi is a Raspberry Pi competitor. The orange Pi computers are produced in different model and series of orange Pi zero, orange Pi one, orange Pi lite, orange Pi  PC, orange Pi plus, orange Pi prime, orange Pi 2G-IOT, orange Pi  Win, orange Pi  Win plus, etc
This computer board is plus series and based on the AllWinner H5 Quad-core Cortex-A53 CPU+Mali 450 GPU, 64-bit support with 512MB DDR3 SDRAM and 8GB eMMC flash, which is booted and operated on the operating system of Android, Ubuntu, Debian Image. This series is low cost, simplified, and funny, to begin controlling the things easily and simply. This board is supplied by 5V DC with 2A current through the OTG-USB port. It has OTG-USB2-host and CSI camera input ports and 40 pins serial, GPIO-UART, and HDMI2.0a output port, and a TFT slot. The Orange Pi Zero Plus 2  is equipped with WiFi and Bluetooth wireless too. This board is designed for educational projects for the starter and learner of this technology, to develop a lite computer, a wireless lite server, play games, play audio-videos, etc.
This computer board is sold alone, but you can prepare its dedicated accessory such as mobile charger, 220 to 5V 2A adapter, Orange Pi case, from our site store.

Feature:
CPU: H5 Quad-core Cortex-A53
GPU:Mali450 GPU
Memory (SDRAM):512MB DDR3 (shared with GPU)
Onboard Storage:TF card (Max. 32GB) /eMMC flash(8GB)
Onboard WIFI:AP6212, IEEE 802.11 b/g/n,BT4.2
Video-Input:
     A CSI input connector Camera 
     Supports 8-bit YUV422 CMOS sensor interface 
     Supports CCIR656 protocol for NTSC and PAL 
     Supports SM pixel camera sensor 
     Supports video capture solution up to 1080p@30fps
Video Outputs:
     Supports HDMI output with HDCP 
     Supports HDMI CEC 
     Supports HDMI 30 function
Power Source: USB OTG can supply power
GPIO(1x3) pin: UART, ground.
Buttons: Power Button
Low-level peripherals:
     26 Pins Header, compatible with Raspberry Pi B+
     13 Pins Header, with 2x USB, IR pin, AUDIO(MIC, AV)
LED: Power led & Status led
Supported OS: Android, Ubuntu, Debian, Raspbian Image
Product size: 46 mm x 48mm