L298P Dual Channel Arduino Motor Driver Shield
-
L298P Dual Channel Arduino Motor Driver Shield
ARD-02-002 -
L298P H-bridge Arduino Motor Driver Shield with Bu
ARD-02-003 -
L293D Motor Driver Shield for Arduino
ARD-02-044 -
7A 160W Dual Channel DC Motor Drive Module (Replac
MTR-08-023 -
L298N Dual-Channel Bipolar DC/Stepper Motor Driver
MTR-09-001 -
L298N Dual-Channel DC/Stepper Motor Driver
MTR-09-003
- +25 4 % $10.35
- +50 6 % $10.15
- +100 8 % $9.94
- +300 9 % $9.74
- +500 11 % $9.54
Description
The Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.
Use L298P IC, max current up to 2A per channel, you can use on small RC car control, stepper motor control, etc. Current measuring with amplification circuit, so you can read the analog value via the Arduino IOs.
The Motor Shield must be powered only by an external power supply. Because the L298 IC mounted on the shield has two separate power connections, one for the logic and one for the motor supply driver. The required motor current often exceeds the maximum USB current rating.
Features
Operating Voltage: 5V to 12V
Motor controller: L298P, Drives 2 DC motors or 1 stepper motor
Max current: 2A per channel or 4A max (with external power supply)
Current sensing: 1.65V/A
Free running stop and brake function