YwRobot DRV8825/A4988 42 Stepper Motor Driver Board

YwRobot DRV8825/A4988 Stepper Motor Driver Board is an expansion board for stepper motor driver modules. It is designed for A4988 and DRV8825 driver modules and provides a convenient interface for stepper motor control. The board includes an on-board DIP switch for adjusting drive segments. It also uses a terminal power connector for drive power connection. This board is suitable for 42 stepper motor drives, 3D printers, and DIY applications. It works with Arduino and microcontroller platforms.

Features of YwRobot DRV8825/A4988 Stepper Motor Driver Board - 5V, 12-30V, 42mm x 42mm x 15mm

• On-board DIP switch
• Easy drive segment adjustment
• Terminal power connector
• Compatible with A4988 and DRV8825
• Suitable for 42 stepper motor drives
• Arduino compatible
• Microcontroller platform support

Specifications of YwRobot DRV8825/A4988 Stepper Motor Driver Board - 5V, 12-30V, 42mm x 42mm x 15mm

• Dimensions: 42 * 42 * 15mm
• Logic Voltage: 5V
• Input Voltage: 12-30V
• Operating Voltage: 5V
• Motor Voltage: 12V ~ 30V
• Applicable Module: A4988, DRV8825
• Interface: Direction, Enable, Speed
• Output: Number
• Platform: Arduino, microcontroller

How to Use YwRobot DRV8825/A4988 Stepper Motor Driver Board - 5V, 12-30V, 42mm x 42mm x 15mm

1. Install the driver module in the correct direction and align the GND pin.
2. Connect the drive power through the terminal power connector.
3. Adjust the drive segments with the on-board DIP switch as needed.

More Info

• This product is an expansion board only and does not include a driver module.
• Incorrect installation direction may burn out the module.