Orange Pi 3 H6 Quad Core Development Board

The Orange Pi 3 H6 Quad Core Development Board is a development board with built-in WiFi, Ethernet, USB ports, HDMI output, and GPIO pins. It supports Android 7.0, Ubuntu, and Debian for flexible development environments. The board includes multiple memory and onboard storage configurations, along with a Micro SD card slot. It also provides audio, video, PCIe, and low-level peripheral interfaces for electronics and robotics projects.

This board is designed for development setups that need network connectivity, display output, and expansion interfaces. The Orange Pi 3 H6 Quad Core Development Board combines processing, graphics, and connectivity features in one compact board.

Features of Orange Pi 3 H6 Quad Core Development Board - 2GB LPDDR3

• H6 quad-core 64-bit CPU
• Built-in WiFi and Bluetooth
• Gigabit Ethernet port
• USB 3.0 host ports
• GPIO and low-level peripheral support

Specifications of Orange Pi 3 H6 Quad Core Development Board - 2GB LPDDR3

• CPU: H6 Quad-core 64-bit 1.8GHZ ARM Cortex™-A53
• GPU: High-performance multi-core GPU Mali T720
• OpenGL ES3.1/3.0/2.0/1.1
• Microsoft DirectX 11 FL9_3
• ASTC (Adaptive Scalable Texture Compression)
• Floating point operation greater than 70 GFLOPS
• Video Decoding: H265/HEVC Main/Main10 [email protected] High-tier
• Video Decoding: 4K@60fps
• Video Decoding: up to 6Kx4K@30fps
• Video Decoding: H264/AVC BP/MP/[email protected]
• Video Decoding: MVC
• Video Decoding: 4K@30fps
• Video Decoding: VP9, Profile 0/2
• Video Decoding: 4K@30fps
• Video Decoding: AVS+/AVS JIZHUN profile@level 6.0
• Video Decoding: 1080P@60fps
• Memory: 1GB LPDDR3 (shared with GPU)+EMMC(Default Empty)
• Memory: 2GB LPDDR3(shared with GPU)+EMMC(Default Empty)
• Memory: 1GB LPDDR3 (shared with GPU)+8GB EMMC Flash
• Memory: 2GB LPDDR3(shared with GPU)+8GB EMMC Flash
• Micro SD card slot
• WiFi+BT: Chip AP6256
• WiFi+BT: IEEE 802.11 a/b/g/n/ac WiFi5
• WiFi+BT: BT5.0
• Onboard Network: Chip RTL8211
• Onboard Network: 10/100M/1000M Ethernet RJ45
• Audio Input: Onboard MIC
• Audio Output: HDMI 2.0a
• Audio Output: 3.5 mm AV Jack
• Video Output: HDMI 2.0a
• Video Output: CVBS
• PCIE: Supports RC mode
• PCIE: Supports x1 Gen2(5.0Gbps) lane
• PCIE: Complies with PCI Express Base 2.0 Specification
• Power Source: Chip AXP805
• Power Source: DC input
• Power Source: MicroUSB (OTG)
• USB 2.0 Ports: 1*USB 2.0 Host
• USB 2.0 Ports: 1*USB OTG 2.0
• USB 3.0 Ports: 4*USB 3.0 Host
• Low-level peripherals: 26pin connector with1 _I2C
• Low-level peripherals: 1*SPI
• Low-level peripherals: 1_UART
• Low-level peripherals: Multiple GPIO Ports
• Low-level peripherals: 3pin Debug ports
• Debug serial port: UART-TX
• Debug serial port: UART-RX
• Debug serial port: GND
• LED: Power led
• LED: Status led
• IR receiver: Onboard IR
• Key: Power(SW4)
• Supported OS: Android7.0
• Supported OS: Ubuntu
• Supported OS: Debian
• Dimension: 60mm
• Dimension: 93.5mm

How to Use Orange Pi 3 H6 Quad Core Development Board - 2GB LPDDR3

1. Install the required operating system.
2. Connect power, display, and network peripherals.
3. Use the USB, GPIO, and other ports for development and expansion.

More Info

• Includes a Micro SD card slot.
• Features built-in WiFi and Ethernet connectivity.
• Provides HDMI 2.0a and CVBS video output options.