Volume discounts:
- +25 4 % $5.04
- +50 6 % $4.93
- +100 8 % $4.83
- +300 10 % $4.72
- +500 12 % $4.61
Shop with confidence
Learn More
Availability:
SKU
SEN-05-013
Ships in 2-3 business days, then:
Free delivery in 10-15 days by YunExpress on orders over $35.
Free delivery in 5-7 days by DHL on orders over $200.
More shipping info
$5.25
Related Tutorials
Interfacing OMRON E3Z-D61 Photoelectric Sensor with Arduino
Specifications:
- Sensing method: Diffuse-reflective
- Sensing distance: 5 mm to 100 mm (White paper 100*100mm)
- Differential distance: 20% Max. of sensing distance
- Light source: Infrared LED (Emission wave length: 860nm)
- Power supply voltage: 12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.)
- Current consumption: 30mA DC Max.
- Control output: Output type: NPN open collector output
- Load current: 0 to 100 mA
- Residual voltage: (DC) 1 V Max. (Load current: Less than 10mA)
- (DC) 2 V Max. (Load current: 10 to 100 mA)
- Operation mode: Light-ON/Dark-ON selectable
- Load power supply voltage: 26.4 VDC Max.
- Protective circuit: Surge suppressor
- Output short-cut protection
- Output reverse polarity protection
- Power supply reverse polarity protection
- Mutual interference prevention
- Response time: 1ms Max.
- Sensitivity setting: Single-turn adjustment
- Insulation resistance: 20 M OHM Min. at 500 VDC between charged parts and the case
- Dielectric strength: 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
- Degree of protection: IEC60529: IP67
- Applicable standard (EC Directive (Low Voltage Directive)): EN60947-5-2
- Applicable standard (EC Directive (EMC))] EMI: EN60947-5-2
- Emission Enclosure: EN55011 Group 1 class A
- EMS: EN60947-5-2
- Immunity ESD: IEC61000-4-2
- Immunity RF-interference: IEC61000-4-3
- Immunity Burst: IEC61000-4-4
- Conformed standard (EC Directive (CE marking)): Equipped
- Connection method: Pre-wired models (Cable length: 2 m)
- Indicator: Operation indicator(orange), Stability indicator(green)
- Weight (packed state): Approx. 65 g
- Tightening torque: 0.5 N.mMax. (with M3 screw)
- Accessories: Instruction manual
Write Your Own Review
Customer Questions