Product added to cart
MKS Robin Nano V3.1 3D Printer Control Board
$37.9500
In stock
SKU
3DP-01-161
Volume discounts:
- +10 4 % $36.5100
- +25 6 % $35.7900
- +50 8 % $35.0800
- +100 9 % $34.3600
- +300 11 % $33.6400
Add an Accessory:
Ships in 2-3 business days, then:
Free delivery in 12-15 days by Tracked Economic Shipping on orders over $100.
Free delivery in 7-10 days by Express Shipping on orders over $300.
More shipping info
Shop with confidence Learn More
TL-W5MC1 Inductive Metal Proximity Switch Sensor Previous 
MKS Robin Nano V3.1 3D Printer Control Board is a 3D printer control board built around the STM32F407VET6 MCU. It provides 168MHz processing performance with 512 KB Flash and 192KB RAM. The board supports USB flash drive use, TF card storage through SPI3, and virtual USB device support. It also includes WiFi connection support through USART1+SP12 and a serial port through UART3. The MKS Robin Nano V3.1 is designed with 6-axis motor interfacing and two Z-axis sharing the same drive Move. It also includes support for multiple LCD options and protected drive and temperature circuits.
Features of MKS Robin Nano V3.1 3D Printer Control Board
- STM32F407VET6 MCU
- 168MHz processor speed
- 6-axis motor interface
- 2 PWM fan channels
- Virtual USB device support
- TVS protected power supply
Specifications of MKS Robin Nano V3.1 3D Printer Control Board
- MCU: STM32F407VET6(168MHz)
- FLASH/RAM: 512 KB Flash/ 192KB RAM
- USB flash drive: support
- TF card: support (SPI3)
- WiFi connection: USART1+SP12
- Virtual USB device: support
- Motor interface: 6-axis (two Z-axis share the same drive Move)
- PWM Fan: 2 channels
- PWM TTL Independent: Support
- Serial Port: Support (UART3)
- Power supply TVS protection: Support
- SD expansion slot: Not supported
- MAX31855 interface: Not supported
- EEPROM SPI: 4KB AT24C32DM
- Flash Memory: 8M W25Q64JVSIQ
- LCD support: MKS TS35/MKS H43/LCD12864/LCD2004
- MOS drive circuit: Resistance protection + Schottky protection
- TH1, TH2, TB temperature circuit: Resistance protection + Schottky protection
How to Use MKS Robin Nano V3.1 3D Printer Control Board
- Install the board in the printer system and connect the required motor, fan, display, and power interfaces.
- Configure storage, communication, and display options using the supported USB, TF card, WiFi, serial port, and LCD features.
More Info
- SD expansion slot is not supported.
- MAX31855 interface is not supported.
- Two Z-axis share the same drive Move.
- MOS drive and temperature circuits include resistance protection + Schottky protection.
| Interface Type | USB, UART, SPI |
|---|---|
| Operating Voltage (V) | 12V, 24V |
| Dimensions (mm) | 110 x 84 mm |
| Mounting Type | Screw holes |
| Control Type | MOSFET |
| Channel Count | 6-axis |
| Control Signal | PWM |
| Chipset | STM32F407VET6 (168MHz) |
| Display Type | LCD |
| Material | PCB |
| Input Type (AC/DC) | DC |
| Protocols | SPI, UART |
| Protection | Support |
Write Your Own Review
Please complete your information below to login.
Sign In
Create New Account