Hantek 6022Bl PC Digital Portable Oscilloscope

The Hantek 6022BL PC Digital Oscilloscope And Logic Analyzer combines a 2-channel digital oscilloscope with a 16-channel logic analyzer. It is a USB-based instrument with a 20MHz bandwidth and a 48MSa/s sample rate. The unit includes memory, FFT, and automatic measurements. It ships with 2 x PP80 standard probes and supports connection to a PC through USB. The oscilloscope and logic analyzer functions are used separately.

Features of Hantek 6022BL PC Digital Oscilloscope And Logic Analyzer

• 2-channel digital oscilloscope
• 16-channel logic analyzer
• USB connection
• 20MHz bandwidth
• 48MSa/s sample rate
• FFT function
• Automatic measurements
• Memory included
• 2 x PP80 standard probes
• Portable design

Specifications of Hantek 6022BL PC Digital Oscilloscope And Logic Analyzer

• Model: Hantek6022BL
• Bandwidth: 20MHz
• Channel: 2 Channel
• Channel: 16 Channel
• Sample Rate: 48MSa/s
• Rise Time: 17.5ns
• Type: Digital
• Output: USB
• Memory: Included
• Compatible Inputs: TTL, LVTTL, CMOS
• Memory Depth: 1M/CH
• Dimensions: 200x100x35mm
• Weight: 0.3KG
• Standard Probe: 2 x PP80
• Power: USB Port
• Time Base Precision: ±50ppm
• Time Base Range: 4ns/div-1h/div (Step by1-2-4)
• Input Impendence: 1M
• Input Sensitivity: 20mV/div～5V/div
• Vertical Resolution: 8Bit
• Vertical Position Range: 20mV ~ 5V/div @ x1 probe; 200mV ~ 50V/div @ x10 probe; 2V ~ 500V/div @ x100 probe; 20V ~ 5KV/div @ x1000 probe
• physDC Accuracy: ±3%
• Bandwidth Limited: 20MHz
• Trigger Type: Edge, Alternative
• Trigger Source: CH1, CH2
• Math: +,-,x,·,FFT, Invert
• Cursor Measurement: Cross, Trace, Horizontal, Vertical
• Auto Measurement: Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
• Max. Impedance: 1M(C=7.5pF)
• Max. Voltage: 0V~5.5V
• Max. Sample: 48M
• Bandwidth: 10MHz

How to Use Hantek 6022BL PC Digital Oscilloscope And Logic Analyzer

1. Connect the device to a PC through the USB port.
2. Attach the supplied PP80 probes or connect logic analyzer inputs as needed.
3. Select oscilloscope mode or logic analyzer mode.
4. Use the measurement, FFT, trigger, and cursor functions on the PC interface.

More Info

• The oscilloscope and logic analyzer functions are used separately.
• The logic analyzer supports TTL, LVTTL, and CMOS inputs.