FNIRSI 1013D Digital Flat Panel Dual-channel Oscilloscope

FNIRSI-1013D is a fully functional and highly practical product launched by FNIRSI. It is aimed at a cost-effective dual-channel flat-panel oscilloscope for people in the maintenance and R&D industry.

As you can see, it™s a small and portable device that you can take it with you wherever you go.

Specifications FNIRSI-1013D Dual-channel Oscilloscope:

• Maximum test voltage: 1X : 40V 10X :400V
• Number of channels: 2
• Cursor type: horizontal X, horizontal Y, trigger Y
• Screen: 7 inches 800 * 480 resolution with capacitive touch
• Scroll mode: support
• One-button AUTO: support
• Display technology: TFT
• Waveform storage: 1000 screenshots + 1000 sets of waveforms
• Analog bandwidth: 100MHz
• Waveform manager: support
• Maximum sampling rate: 1GS/s
• Voltage accuracy: 2%
• Rise time: <3ns
• Frequency precision: 0.01%
• Input resistance: 1MOhm
• Battery: 6000mAh lithium / 4 hours operation / 5 hours charge
• Sensitivity: 50mV ~ 500V
• Time base: 50S ~ 10nS
• Extension: USB export
• Dimensions: 184*124*50 (mm)

Features of FNIRSI-1013D Dual-channel Oscilloscope:

• Real-time sampling rate of up to 1GSa/s and an analog bandwidth of 100MHz*2
• Built-in high-voltage protection module, which can tolerate up to 400V continuous power pressure.
• Equipped with efficient one-button AUTO, the measured waveform can be displayed without cumbersome adjustment
• Large time base scrolling mode, which can monitor slow level changes
• The high-definition LCD screen with a high rate of power, the operation mode is capacitive screen touch + gesture operation
• The amount, and the peak-to-peak and frequency can be directly obtained without conversion.
• Lissajous pattern graphic display can be used to analyze relation of two input channels waveform to each other
• Screen and waveform storage function, built-in 1GB storage space, can store up to 1000 screenshots
• +1000 sets of waveform data, the storage process is simple and fast, and the current waveform can be saved anytime, anywhere.
• Waveform picture manager provides waveform data and screenshot management capabilities. You can browse, view, pan and zoom on your pictures just like a smart phone.
• The body is equipped with a USB interface, which can be connected to a computer to realize its own screenshots
• Sharing between them is convenient for secondary analysis
• FFT analysis function, which can analyze the harmonic components of the signal.
• Amplitude, frequency, and phase comparison judgment

FNIRSI 1013D Dual-channel Oscilloscope package content:

• 1x FNIRSI 1013D oscilloscope
• 2x 100MHz matching probes (1X and 10X)
• 1x USB cable
• 1x Charging adapter
• 1x Instruction manual

Connection ports of FNIRSI 1013D Dual-channel Oscilloscope

At the top of the FNIRSI 1013D oscilloscope, there are two input channels enabling users to simultaneously measure two distinct signals for comparative analysis, such as assessing the input and output signals of a power amplifier unit. The input channels incorporate high-voltage protection modules capable of managing input voltages of up to 400V. In addition to the input channels, there are power supply toggle buttons and a USB Type-C port. These constitute the sole external interfaces and buttons on the oscilloscope.

Inside of the FNIRSI 1013D Dual-channel Oscilloscope

The hardware architecture uses an Arm + FPGA + high-speed ADC design. The oscilloscope uses the ANLOGIC EF2L45LG144B FPGA and two ADC with illegible markings used to process digital signals.Also we can see the display part relies on the Allwinner F1C100s ARM9 processor to drive the TFT screen.