BME280 Atmospheric Pressure Altimeter Sensor Module
[SEN-08-023]
Volume discounts:
- +25 4 % $2.83
- +100 6 % $2.76
- +300 8 % $2.70
- +500 11 % $2.64
- +1000 13 % $2.58
Shop with confidence
Learn More
Availability:
SKU
SEN-08-023
Ships in 2-3 business days, then:
Free delivery in 10-15 days by YunExpress on orders over $35.
Free delivery in 5-7 days by DHL on orders over $200.
More shipping info
$2.95
GY-BME280-3.3 BME280 Atmospheric Pressure Sensor Module is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity & Pressure Sensor.
The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.
Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO.
If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!
Features OF BME280 Atmospheric Pressure Altimeter Sensor Module:
- Package 2.5 mm x 2.5 mm x 0.93 mm metal lid LGA
- Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
- Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V
- VDDIO interface voltage range: 1.2 V to 3.6 V
- Current consumption 1.8 uA @ 1 Hz humidity and temperature
- 2.8 uA @ 1 Hz pressure and temperature
- 3.6 uA @ 1 Hz humidity, pressure and temperature
- 0.1 uA in sleep mode
- Operating range -40…+85 C, 0…100 % rel. humidity, 300…1100 hPa- Humidity sensor and pressure sensor can be independently enabled/disabled
Specifications of BME280 Atmospheric Pressure Altimeter Sensor Module:
- Model: GY-BME2
- Chip: BME280
- Power Supply: 3.3-5VDC
- Peak Current: 1.12mA
- Air Pressure Range: 300-1100hPa (equi. to +9000…-500m above sea level)
- Temperature Range: -40 to +85 °C
- Digital Interfaces: I2C (up to 3.4 MHz) SPI (3 and 4 wire, up to 10 MHz)
- Size: 15.5x12x2.4mm
Write Your Own Review
Customer Questions