Waveshare 1.5 inch RGB SPI OLED Display Module

The Waveshare 1.5 Inch RGB SPI OLED Display Module is a general RGB OLED display module with a 1.5inch diagonal size. It features 128x128 pixels and 16-bit high color output with 65K colors. The module includes an embedded controller and communicates through an SPI interface. It supports colorful image display with a compact display format. This OLED display module is suitable for electronics and development projects that require an SPI-based RGB screen.

Features of Waveshare 1.5 Inch RGB SPI OLED Display Module - 128x128

• 128x128 high resolution
• 65K colors
• Embedded controller
• 4-wire SPI interface
• 3-wire SPI interface
• Onboard resistor configuration
• Development resources included
• Manual included

Specifications of Waveshare 1.5 Inch RGB SPI OLED Display Module - 128x128

• Driver: SSD1351
• Interface: 4-wire SPI
• Interface: 3-wire SPI
• Display color: RGB
• Display color: 65K colors
• Resolution: 128x128
• Viewing angle: >160°
• Operating voltage: 3.3V / 5V
• Dimension: 44.5 x 37 (mm)
• VCC: Power (3.3~5V input)
• GND: Ground
• DIN: Data input
• CLK: Clock data input
• CS: Chip selection, low active
• DC: 4-wire SPI data/command selection (high for data, low for command)
• DC: 3-wire SPI connects to GND, keeps low
• RST: Reset, low active
• BS: 4-wire SPI: 0
• BS: 3-wire SPI: 1
• Development resources examples: Raspberry Pi
• Development resources examples: Jetson Nano
• Development resources examples: Arduino
• Development resources examples: STM32
• Product type: RGB OLED display module
• Diagonal size: 1.5inch
• Communications: SPI interface

How to Use Waveshare 1.5 Inch RGB SPI OLED Display Module - 128x128

1. Connect the power, ground, and SPI signal lines.
2. Select 4-wire SPI or 3-wire SPI using the onboard resistor configuration.
3. Use the available development resources and manual for setup.

More Info

• Embedded controller included
• Development resources link is provided