0.66inch 64x48 I2C OLED Display Module - One Color
- +100 7 % $2.10
- +300 9 % $2.05
- +500 11 % $2.00
- +1000 13 % $1.95
ESP8266 WeMos D1 Mini 0.66 Inch OLED Shield [SSD1306 Driver] is a WeMos display shield board that is developed by WEMOS Electronic developer compatible with any ESP8266 D1 boards. This shield is a peripheral board that can add a display of WeMos Mini D1 OLED to the ESP8266 boards. This display board is a tiny display with high visibility in any environmental light condition of dark or bright, that can be supplied with just a TTL logic level of 3.3V DC. This display shiled is equipped with an onboard reset circuitry (no need the reset key or pin) and can communicate through the serial I2C interface requiring just two data pins to connect to the module.
The ESP8266 series module is based on an ESP8266 WiFi module and one and more peripheral board. The ESP8266 boards are WIFI Arduino shield boards with a 160MHz, 32bit self processor and TCP/IP protocol, that can add Wi-Fi communication capability to the Arduino and microcontroller boards and also supporting the APSD and VOIP protocol. The ESP8266 module has enough processing capability and storage to be added with other simple boards with at least expansion up-front and minimum loading during runtime. The ESP8266 development board is interfaced with other boards through the I2C, UART, and SPI serial communication protocol. Communication with ESP8266 and its configuration is performed through the "AT Command" instructions. The ESP8266 can incorporate with another simple usual board such as this micro switchboard, the sensor boards, driver boards, and so on, to add WIFI capability to these boards. So all the ESP8266 boards have uniform interfaces includes GPIO, I2C, UART, and SPI serial communication header pins.
Screen Size: 64×48 pixels (0.66” landscape)
Operating Voltage: 3.3V
Driver IC: SSD1306
IIC Address: 0x3C or 0x3D
all I/O is designed to be 3.3V compliant only.
1 x OLED Shield
2 x Pin headers