XY-L30A Battery Charging Control Module - 6-60V

XY-L30A 6-60V 30A 400W Solar Battery Charging Controller Module with LCD Display is best for anyone who loves to utilize Batteries for electronics projects and other applications, battery health is quite an important factor to consider, as you will want your batteries to not only last a long time, but also continue to deliver the power you want for as long as possible throughout their lifespans. Fortunately, this is a lot easier to do nowadays, with awesome Charging Modules like XY-L30A BMS 6-60V 30A Lithium Battery Charging Protection Module with LCD Display, which is a battery-health charging control unit designed to keep batteries or Cell Packs ranging between 6V and 60V DC fully charged, electrically healthy, and of course ready to deliver the power that you want to rely on, when you need it most.

In addition to the very clever collection of automatic battery protection and Battery Charging features, the XY-L30A Charge Module also offers a range of extra features focused on convenience for the user. These include the ability to define a maximum and minimum voltage range for charging, a handy recharge timing function, automatic battery detection and parameter setting, as well as an extra safety feature to let the user know when the battery or cell pack is not connected properly.

These features, in addition to the high quality components and easy usability of these Modules, make the XY-L30A Charge Module an excellent tool for anyone who likes to take care of their batteries, with safety features, a range of functions focused on convenience, as well as a fantastic onboard LCD display for easy operations and quick battery status identification.

Specificatoins of XY-L30A Battery Charging Control Module - 6-60V:

• Model Number: XY-L30A
• Charging Voltage Range: 6V to 60V DC
• Max Charging Current: ‰¤30A
• Charging Accuracy: 0.1V
• Battery Compatibility: Lithium / Multi-Cell Packs (2S to 14S) / Lead Acid
• Onboard Buttons: SET | UP | DOWN
• Onboard Indicators: Charging | Running
• Integrated Relay: Songle 30A Relay: SLA-05VDC-SL-A
• Integrated Display: White on Blue LCD Display
• Dimensions: 92 x 45mm
• Weight: 58g

Features of XY-L30A Battery Charging Control Module - 6-60V:

• LCD display: battery voltage, Percentage of electricity, Charging time.
• Working status indicator
• Automatically controls charging/discharging to protect battery.
• Charging time recording function: The product will record a full charge time when the charging time control is not turned on.Flashing shows the charging time when entering the time display interface.The data will be emptied when exit the time display interface or the next charge is turned on (the relay is turned on)
• Automatic parameter detection: The system will flash 'ERR' to indicate the reminder when the parameter is set and exiting but Lower limit voltage 'dn' more than Upper limit voltage 'UP'.
• Battery connection detection: This product is attached to the battery. If the battery is not connected, the system will display 'nbE' on the lower line to remind you
• Support UART data upload and parameter setting functions (TTL level); UART: 115200, 8, 1
• Data upload message format: Battery voltage + battery percentage + charging time + charging status(eg:12.0V, 020%, 00:10, OP)
• Control voltage range is DC 6V-60V. But battery voltage max is 48V. Because the voltage of 48V battery is 60V after fully charged.
• The relay automatically turned on and off continuously and flashing light, if your charging current is too large or the battery capacity is too small. At this point you have to reduce the charging current.Usually the charging current is 10-15% of the battery capacity.
• Automatically cycled. Voltage control mode only controls turn-off and turn-on. But can't limit current, the charging current is completely dependent on your charger.
• You can't charge a 24V battery by inputting 12V Or charge a 12V battery by inputting 48V. Because this is a simple voltage controller just for ON/OFF, It can not change output voltage.
• Applied in Car, Electric car,Factory,Communications room,Radar station,Computer room

Usage Notes For XY-L30A Battery Charging Control Module - 6-60V:

Function 1. Automatic Charge control function:

By setting the volt-HI:˜UP™ volt-LI:˜dn™;When the battery voltage is below the volt-LI:™dn™,the relay leads,the charger begins to charge the battery;when the battery voltage is up to volt-HI:™UP™,the relay is diconnected and the automatic charge is completed once;

2. Charge Time Control Function:

How to turn on the time control function?

After entering the parameter set, set the parameter op is non-zero, then turn on the time control function, op default parameter is:--:--h, the default does not turn on time control function;

After the opening Time control function (OP is non-zero), when the battery voltage is the lower volt-LI™dn™, the charger began to charge the battery, the system began to clock; During the timing, the battery voltage ‰¥ volt-HI™UP™, relay disconnect; If the OP time is up, the battery voltage is still the lower volt-LI™dn™, the relay keeps the conduction, automatically closes the charge time control function, and flashes the H:ER to remind the user, the time parameter setting is unreasonable; Press any key to stop flashing;

Note: Time format: 00:59 (00 for hours, 59 for minutes) The maximum time is 99:59, which is 100 hours.

3. Serial data upload and parameter setting function:

The system supports UART data upload and parameter setting UART:115200,8,1.

Data Upload message Format: Battery voltage + battery percent + charge time + charge status 12.0V,020%,00:10,OP

Command->Function

on->Relays enable to open

off->Relays disable to open

start->Start data upload

stop->Stop data upload

read->Read the param setting

dw10.0->Set volt-LI:™dn™

up20.0->Set volt-HI:™UP™

xx:xx->Set the charge time OP (00:00 stop charge time)

4.Parameter Setting

Press and hold the SET key to enter the setting interface;

Switch the parameters you want to set by short press SET;

After the selection of parameters, can be set by the UP/DOWN key to support the short press, long press (fast increase or decrease); To set other parameters, repeat step b, c);

After all parameters are set, long press set key to exit and save;

5. Key Function Description:

In the Run interface (main interface):

Short press SET button to display the current set of parameters;