SHT10 Temperature Humidity Sensor Module

The SHT10 Temperature Humidity Sensor Module is a digital sensor module for relative humidity and temperature measurement. It also supports accurate dew point measurement. The module is fully calibrated and does not require recalibration. It uses a two-wire digital interface for simple system integration. The SHT10 Temperature Humidity Sensor Module is designed for high reliability, long-term stability, and low power consumption.

Features of SHT10 Temperature Humidity Sensor Module

• Measures relative humidity and temperature
• Accurate dew point measurement
• Fully calibrated output
• No recalibration required
• Two-wire digital interface
• High reliability
• Long-term stability
• Low power consumption

Specifications of SHT10 Temperature Humidity Sensor Module

• Input Voltage: 3.3V
• Output Type: Digital
• ADC: 14 bit
• Two mounting holes diameter: 3mm
• Temperature Range: -40°C ~ 123,8°C
• Temperature Accuracy: ±0.5°C
• Temperature Resolution: 0.01°
• Humidity Range: 0% ~ 100% RH
• Humidity Accuracy: ±4.5% RH
• Humidity Resolution: 0.03% RH
• Pin Number: 4 Pin
• Size: 23mm x 11mm x 2mm

How to Use SHT10 Temperature Humidity Sensor Module

1. Connect the module using the 4-pin interface.
2. Apply the 3.3V input voltage.
3. Read the digital temperature and humidity output.

More Info

• Based on the SHT1x family, including SHT10, SHT11, and SHT15.
• Suitable for digital sensor integration.