Product added to cart
GY-25 MPU6050 3 Axis Accelerometer Gyroscope Module
$4.5000
In stock
SKU
SEN-02-007
Volume discounts:
- +25 4 % $4.3200
- +100 6 % $4.2300
- +300 8 % $4.1300
- +500 10 % $4.0400
- +1000 12 % $3.9500
Ships in 2-3 business days, then:
Free delivery in 12-15 days by Tracked Economic Shipping on orders over $100.
Free delivery in 7-10 days by Express Shipping on orders over $300.
More shipping info
Shop with confidence Learn More
GY-BMI160 Module 6DOF 6 Axis Angular Velocity Previous 
GY-25 MPU6050 3 Axis Accelerometer Gyroscope Module is a low-cost tilt module for angle and acceleration measurement in electronics and robotics projects. It uses gyroscope and accelerometer data fusion to produce direct angle data. The module supports serial communication with 9600bps and 115200bps baud rates. It offers continuous output and query output modes. Its small size and low power consumption make it suitable for compact designs.
Features of GY-25 MPU6050 3 Axis Accelerometer Gyroscope Module
- Three-axis angle and acceleration measurement
- Gyroscope and accelerometer data fusion
- Serial communication format
- Continuous output mode
- Query output mode
- Small volume
- Low cost
Specifications of GY-25 MPU6050 3 Axis Accelerometer Gyroscope Module
- Measuring range: -180° to 180°
- Resolution: 0.01°
- Measurement accuracy: 1° (inclination)
- Repeatability: 1°
- Response frequency: 100HZ (115200bps)
- Working voltage: 3-5V
- Working current: 15mA
- Operating temperature: -20° Celsius ~ 85° Celsius
- Storage temperature: -40° Celsius to 125° Celsius
- Size: 15mm x 11mm
How to Use GY-25 MPU6050 3 Axis Accelerometer Gyroscope Module
- Connect the module to a microcontroller or computer through serial communication.
- Select the baud rate as 9600bps or 115200bps.
- Use continuous output or query output mode as required.
More Info
- The module can connect with single-chip computers and computers.
- The I/O module is TTL level.
- The right solder pin is grounded.
- After restarting, the module enters IIC mode.
- When the module is turned on and calibrated, it should be held for more than 3 seconds.
- Euler angle roll and pitch may influence each other at 90 degrees.
- It can be directly connected with chips such as PL2303, CH340 and FT232.
- It is not compatible with the computer's 9-pin serial port.
| Interface Type | UART |
|---|---|
| Operating Voltage (V) | 3-5 |
| Operating Current (mA) | 15 |
| Operating Temp (°C) | -20 to 85 |
| Dimensions (mm) | 15 x 11 |
| Mounting Type | THT (Through Hole) |
| Output Type | UART |
| Accuracy | 1° |
| Resolution | 0.01° |
| Response Time | 10 ms |
| Measurement Range | -180° to 180° |
| Number of Axes | 3-axis |
| Acceleration Range (g) | ±2g, ±4g, ±8g, ±16g |
| Gyro Range (dps) | ±250dps, ±500dps, ±1000dps, ±2000dps |
| Sampling Rate (Hz) | 100Hz |
| Push Button | No |
| Sensor Type | accelerometer, gyroscope |
| Protocols | UART |
| Supply Current | mA |
| Chipset | MPU6050 |
| Storage Temperature | -40°C to 125°C |
Write Your Own Review
Please complete your information below to login.
Sign In
Create New Account