DC-DC USB Buck Boost Power Supply Voltage Regulator With Display - 5V to 3.3/9/12/24V

XY-LUP is a DC-DC USB buck boost power supply module with a display for voltage and current measurement. It supports two work modes: PER and VAH. In PER mode, it works as a buck-boost power supply module. In VAH mode, it works as a multi-function voltmeter and ammeter. It provides voltage, current, power, battery capacity, and battery discharge time measurement functions. This module is designed with three input methods and a high-definition LCD display. It is suitable for electronics, robotics, and instrumentation projects that need adjustable power output and measurement functions.

Features of XY-LUP DC-DC USB Buck Boost Power Supply Voltage Regulator With Display

• Dual operating modes
• Buck-boost power output
• Voltage and current measurement
• Multi-parameter display
• Three input methods
• Voltage and current calibration
• Over-power protection
• Backlight control

Specifications of XY-LUP DC-DC USB Buck Boost Power Supply Voltage Regulator With Display

• Model: XY-LUP
• Work Voltage: DC 3.5V-12V
• Output Voltage: DC 1.2V-24V
• Output Power: 3W(MAX)
• Maximum output power within 2W when output DC 1.2V~2V
• Maximum output power within 3W when output DC 2V~20V
• Maximum output power within 2.5W when output DC 20V~24V
• Output voltage accuracy: +/-0.5%
• Output voltage accuracy: +/-1%
• Measure voltage range: DC 0~35V
• Measure current range: 0~3A
• Measure power range: 0~110W
• Measure battery capacity range: 0~9999Ah
• Discharging time: 0~100hours
• Work Temperature: -40~85
• Work Humidity: 0%~95%RH
• Size: 77*33*16mm

How to Use XY-LUP DC-DC USB Buck Boost Power Supply Voltage Regulator With Display

1. Connect the input power supply.
2. Select the work mode by pressing and holding the ON/OFF button for 10 seconds.
3. Connect the load or measured device.
4. Adjust the output voltage with the potentiometer in PER mode.

More Info

• PER mode uses USB, Micro USB, and VIN+/VIN- input.
• PER mode outputs through OUT+ and OUT-.
• COM is not available in PER mode.
• VAH mode uses V and COM for voltage measurement.
• VAH mode uses A and COM for current measurement.
• Reverse connection protection is not supported.
• OPP appears on the display when rated power is exceeded.
• Potentiometer is not available in VAH mode.