Arduino 101 (Genuino)

Arduino 101 (Genuino) is a learning and development board built around the Intel Curie microcontroller. It combines the Arduino UNO form factor and peripheral set with onboard Bluetooth LE and a 6-axis accelerometer/gyro. The board includes two cores: x86 (Quark) and a 32-bit ARC core, both running at 32 MHz. It supports USB communication for serial connection and sketch uploading, plus a power jack and an ICSP header with SPI signals and dedicated I2C pins. This Arduino 101 (Genuino) board is designed for development workflows that need a compact feature set and onboard wireless and motion sensing functions.

Features of Arduino 101 (Genuino)

• Intel Curie microcontroller
• Onboard Bluetooth LE
• 6-axis accelerometer/gyro
• Two-core architecture
• USB serial communication
• Sketch upload support
• ICSP header with SPI signals
• Dedicated I2C pins

Specifications of Arduino 101 (Genuino)

• Microcontroller: Intel Curie
• Operating voltage: 3.3 V
• 5 V tolerant I/O
• Input voltage (recommended): 7-12 V
• Input voltage (limit): 7-20 V
• Digital I/O pins: 14
• PWM digital I/O pins: 4
• Analog input pins: 6
• DC current per I/O pin: 20 mA
• Flash memory: 196 kB
• SRAM: 24 kB
• Clock frequency: 32 MHz
• Bluetooth LE
• 6-axis accelerometer/gyro
• Dimensions: 68.6 x 53.4 mm

How to Use Arduino 101 (Genuino)

1. Connect the board using the USB port or power jack.
2. Upload your sketch through the USB connection.
3. Use the digital, analog, PWM, SPI, and I2C interfaces as needed.
4. Access Bluetooth LE or motion sensing features in your project.

More Info

• Includes a USB interface for serial communication.
• Uses a form factor similar to Arduino UNO.
• Developed in collaboration with Intel.