The 4 Channel POE Power Supply Module is a non-standard passive PoE injector that simplifies the process of supplying power to PoE or non-PoE devices via an Ethernet cable. It is compatible with IEEE802.3af/at network devices and delivers power directly without auto-detection. This injector is ideal for powering devices like IP cameras and other network equipment, ensuring they receive stable and reliable power. Please note that a separate power supply is required and not included in this package.
Specifications of 4 Channel POE Power Supply Module
-
Voltage: DC12V-48V (up to 10A)
-
LED: Indicates the working state
-
Power Pin: 4&5(+), 7&8(-)
-
Data Pin: 1236
-
LAN Port: 8 ports in RJ45 (data in), 8 ports PoE RJ45 (data & power out)
-
LAN Environment: 10/100Mbps Base-T
-
Ethernet Cable: TIA/EIA 568 Cat.5 or Cat.5e
-
Data In: PC/Hub/Switch/Router, etc.
-
Working Temperature: 0~+40°C
-
Working Humidity: 20~90% RH non-condensing
-
Storage Temperature & Humidity: -20~+85°C, 10~95% RH
-
Dimensions: 100x47x31mm
Tips Before Purchase
-
This module does not include auto detection and supplies power directly once connected.
-
Ensure your powered device or PoE splitter conforms to the IEEE 802.3af/at standard.
-
Calculate power input based on power output and number of channels used.
-
The total power consumption must be lower than the total power supply to ensure stable operation.
-
Compatible with IEEE802.3af/at standard PoE powered devices like DAHUA and HIKVISION IP cameras.
-
A separate power supply is required and not included.