The Xilinx ZYNQ7010 FPGA Development Board is a high-performance platform designed for embedded processing and digital signal processing applications. Featuring the XC72010/XC7020 FPGA, this board integrates a dual-core ARM Cortex-A9 processor and FPGA logic to deliver versatile processing capabilities. It comes with 512MB DDR3 RAM, multiple I/O interfaces including HDMI, Gigabit Ethernet, and USB, and is equipped with various on-board peripherals, making it ideal for a wide range of applications in embedded systems, signal processing, and prototyping.
Specifications of Xilinx ZYNQ7010 FPGA Development Board
-
FPGA: XC72010/XC7020
-
Crystal Oscillator: 50M/33.3M
-
DDR3 RAM: 512MB (MT41K256M16TW-107 IT:P)
-
FLASH: W25Q128, 128Mbit QSPI
-
Power Supply: 3.3V/1500mA
-
PCB: 8 layers, impedance + equal length + immersion gold + differential
-
FPGA Logic Resources: 28KLE/85KLE
-
FPGA RAM Resources: 2.1Mb/4.9Mb
-
Core Operating Voltage: 3.3V
-
Dimensions: 80.6x56.1mm
Development Resources of Xilinx ZYNQ7010 FPGA Development Board
Development Resources of Xilinx ZYNQ7010 FPGA Development Board
توضیحات اضافه برای این محصول
Size: 8.06*5.61cm | FPGA : XC72010/XC7020 Crystal oscillator: 50M/33.3M DDR3 : 512MB FLASH : wW25Q128, 128Mbit QSPI Power supply: 3.3V/1500mA PCB: 8 layers, impedance + equal length + immersion gold + differential FPGA logic resources: 28KLE/85KLE | FPGA RAM resources: 2.1Mb/4.9Mb | Core operating voltage: 3.3V 10 Bank Number: 2 | DDR3 hard core controller: 1 | DSP Slices : 80/220 | FPGA pin count: 100/125 | ARM hardware system (PS): CPU, RAM, Main frequency, various interfaces Peripherals, PIO connection and chips: button PS— button (PL) — RTLE211F-CG- (network chip) | Lead 10 (PL) - — VCCIO35 level control = NOR FLASH (W25Q128JVSIQ) | regulator TPS563201/1.8V— downloader chip (JTAG18MO2HS2) regulator TPS563201 1.5 USB to Serial (CH9102F) | JTAG + PS_UART - USB Type-C SD Card Slot Start Button Reset button regulator TPS563201 3.3V USB Chip USB3320(USB PHY) regulator TPS5632011.0V Active crystal oscillator 50MHZ ZYNQ chip (XC7Z010/XC7020) DDR3 512MB (MT41K256M16TW-107 IT:P) Gigabit Ethernet port USB Host/slave interface USB master-slave switch HDMI port (10)