Voltage and Current Adjustable Switching Power Supply SMPS with Display

The Voltage and Current Adjustable Switching Power Supply SMPS with Display is a precision power supply for voltage and current control. It includes a digital display for real-time monitoring of voltage and current. The unit supports adjustable output settings and clear operation feedback. This switching power supply is offered in multiple models for different output ranges. It also includes built-in protection functions for controlled operation.

Features of Voltage And Current Adjustable Switching Power Supply SMPS With Display - 0-60V

• Digital real-time display
• Voltage adjustment support
• Current adjustment support
• Short circuit current limit protection
• Automatic recovery function

Specifications of Voltage And Current Adjustable Switching Power Supply SMPS With Display - 0-60V

• Models: 0-60V DXS-500W (voltage and current adjustable digital display)
• Models: 0-60V DXS-1000W (voltage and current adjustable digital display)
• Models: 0-48V DXS-800W (voltage and current adjustable digital display)
• Ripple Voltage: No more than 100mV
• Equivalent Internal Resistance: Not more than 0.05Ω
• Voltage Adjustment Rate: 100%
• Dimensions: 215x115x50mm
• Protection: Short circuit current limit protection
• Protection: Automatic recovery function

How to Use Voltage And Current Adjustable Switching Power Supply SMPS With Display - 0-60V

1. Power off the unit before current adjustment.
2. Set the pull switch to the current regulating gear position and insert the dedicated current regulating insert into the 2nd and 3rd ports of the wiring port.
3. Turn on the power supply and use the current adjustment knob to set the desired current limit.
4. Remove the current regulating insert and move the pull switch to the open (use) position.
5. Adjust the output voltage with the voltage adjustment knob and monitor the display in real time.

More Info

• Current display values listed: 0-21A/0-16A/0-11A/0-6.5A
• Voltage display may show approximately 0.90V after removing the current regulating insert
• Current display may show 0.00A after removing the current regulating insert
• At 95% of the current limiting parameter, overload protection is activated