RFID Learning Starter Kit for Arduino UNO R3

Arduino UNO R3 RFID Learning Starter Kit combines an UNO board with a wide set of electronic parts for introductory robotics and electronics projects. It includes core modules, displays, sensors, switches, LEDs, and passive components in one package. The kit also adds RFID hardware, motor parts, and supporting accessories for hands-on circuit building. Use this starter kit as a general learning set for Arduino-based prototyping and component practice.

Features of Arduino UNO R3 RFID Learning Starter Kit

• Arduino UNO R3 included
• RFID module included
• Multiple display modules
• Wide component assortment
• Motor and control parts included
• Basic prototyping accessories included

Specifications of Arduino UNO R3 RFID Learning Starter Kit

• 1 X UNO Board
• 1 X USB Cable
• 1 X Jump Cable
• 1 X Breadboard
• 5 X LED Light
• 1 Pack Resistor
• 1 X Female to male dupond line
• 1 X Potentiometer
• 1 X Buzzer
• 1 X 74HC595
• 1 X Infrared receiver
• 1 X LM35
• 1 X Flame Sensor
• 1 X Ball Switch
• 1 X Photoresistor
• 1 X Key button
• 1 X Remote control
• 1 X 4-digit display tube
• 1 X 8*8 Dot matrix module
• 1 X 1-digit display tube
• 1 X Stepper motor driver board
• 1 X Stepper motor
• 1 X 9g Servo
• 1 X IIC 1602 LCD
• 1 X XY joystick module
• 1 X Temperature module
• 1 X Water test module
• 1 X RFID Module
• 1 X RFID keychain
• 1 X RFID White card
• 1 X Sound Module
• 1 X Relay Module
• 1 X Clock Module
• 1 X 4*4 Key board
• 1 X RGB 3 color module
• 1 X 9V battery Snap
• 1xBreadborad
• 1xUSB Cable
• 1xArduini UNO R3
• 1xRemotee Control + Receiving Head
• 1x1602 Blue Screen
• 1xDupont Line
• 1xSG90 Servo Motor
• 1x5V Stepper Motor
• 1xHHC Small Motor
• 5xPN2222 Transistor
• 5xBC547 Transistor
• 5xBC557 Transistor
• 1xDriver Board
• 5xBlue LED
• 5xGreen LED
• 5xYellow LED
• 5xWhite LED
• 5xRed LED
• 1x10K Adjustable Resistor
• 2xPhotocell
• 5x4001
• 1xThermistor
• 1xPassive Buzzer
• 5xSmall Button
• 5x22pf Ceramic Capacitor
• 5x104 ceram capacitor
• 2x10uf 50V
• 2x100uf 50V
• 1xPlastic Box
• 1x9V 1A Power Supply
• 10x220R
• 10x200R
• 10x100R
• 10x100K
• 10x1K
• 10x2K
• 10x5.1K
• 10x10K
• 10x1R
• 10x20K
• 1x9V Battery Plug
• 1x5V 1ch Relay
• 1x8x8 Dot Matrix
• 1xFour Digital Tubes
• 1xDigital Tube
• 1x595 IC
• 1xMax7219 IC
• 1xL293D IC
• 1x605c
• 1xBlack Rocker Switch
• 1xSR04 Sensor
• 1x1x40 Pin Header
• 1xRC522 Module
• 1xRFID S50 Tag

How to Use Arduino UNO R3 RFID Learning Starter Kit

1. Connect the UNO board to the included breadboard and USB cable.
2. Choose the required module, sensor, or component for your circuit.
3. Wire the parts with the included jump cables and dupont lines.
4. Power the setup with the included 9V battery snap or 9V 1A power supply when needed.

More Info

• Includes RFID keychain, RFID White card, and RFID S50 Tag.
• Includes display and control parts such as LCD, dot matrix, keypad, and relay module.
• Includes mixed components for circuit practice and prototype assembly.