Product added to cart
NRF24L01+PA+LNA with USB Interface, Ceramic Antenna
$7.5000
In stock
SKU
COM-09-095
Volume discounts:
- +25 4 % $7.1800
- +50 6 % $7.0200
- +100 8 % $6.8700
- +300 11 % $6.7100
- +500 13 % $6.5500
Ships in 2-3 business days, then:
Free delivery in 12-15 days by Tracked Economic Shipping on orders over $100.
Free delivery in 7-10 days by Express Shipping on orders over $300.
More shipping info
Shop with confidence Learn More
NRF24L01+PA+LNA with USB Interface, Ceramic Antenna is a wireless communication module for industrial and IoT applications. It integrates a USB interface and supports AT commands through a virtual serial port. The module uses an RFX2401C RF front-end amplifier chip and includes a ceramic antenna. It is designed for reliable operation in noisy environments and retains system parameters after power-down.
Features of NRF24L01+PA+LNA with USB Interface, Ceramic Antenna
- USB interface
- Virtual serial port control
- AT command support
- RFX2401C chip
- Built-in watchdog timer
- Parameter retention after power-off
- Industrial compatibility
- Ceramic antenna
- Maximum data length: 31 bytes per message
Specifications of NRF24L01+PA+LNA with USB Interface, Ceramic Antenna
- IC: NRF24L01+
- Frequency: 2.4GHz
- Input Voltage: 1.9V ~ 3.6V
- Transmitting Power: +7dB
- Receiving Sensitivity: ≤ -90dB
- Data Rate: 2Mbps
- Data Rate: 1Mbps
- Data Rate: 250Kbps
- RX Mode Current: 15mA at 2Mbps
- RX Mode Current: 14.5mA at 1Mbps
- RX Mode Current: 14mA at 250Kbps
- Sleep Mode Current: 15μA
- Power-Off Current: 700nA
- AT+BAUD=n (n=1–7 for 4800–115200bps)
- AT+RATE=n (n=1 for 250Kbps, 2 for 1Mbps, 3 for 2Mbps)
- AT+RXA=0x??,...
- AT+TXA=0x??,...
- AT+FREQ=2.xxxG (2.400–2.525GHz)
- AT+CRC=n (n=8 or 16 for 8-bit or 16-bit CRC)
- AT?
- AT+init
- AT+VER
- Applications: IoT systems
- Applications: Wireless communication in industrial environments
- Applications: Remote sensing and control
- Applications: Robotics
- Applications: Automation systems
- CH340 USB Driver
- Datasheet: Not available.
How to Use NRF24L01+PA+LNA with USB Interface, Ceramic Antenna
- Connect the module through the USB interface.
- Configure settings with AT commands through the virtual serial port.
- Use the available AT commands to set baud rate, wireless rate, addresses, channel, and CRC.
More Info
- The module supports querying system parameters with AT?
- Factory reset is available with AT+init.
- Firmware version can be queried with AT+VER.
| Interface Type | USB |
|---|---|
| Operating Voltage (V) | 3.3V |
| Operating Current (mA) | 15mA, 14.5mA, 14mA, 15µA, 700nA |
| Operating Temp (°C) | -40 to 85 |
| Connector | USB |
| Wireless Protocol | Enhanced ShockBurst (ESB) |
| Frequency Band | 2.4GHz |
| Data transmission rate | 2Mbps, 1Mbps, 250Kbps |
| RF Modulation | GFSK |
| TX Power (dBm) | +7dB, +22dBm |
| Range (m) | 1km |
| SIM Slots | 0 |
| Chipset | NRF24L01+, RFX2401C |
| Modes | Sleep Mode, Power-Off, RX Mode |
| Input Voltage (V) | 1.9V ~ 3.6V |
| Antenna Type | Internal Antenna |
| Application | Robotics, Industrial, IoT, Automation systems, Remote sensing and control |
Write Your Own Review
Please complete your information below to login.
Sign In
Create New Account