NRF24L01+PA+LNA Wireless RF Transceiver Module (2.4GHz) - 1km Range

The NRF24L01+PA+LNA Wireless RF Transceiver Module is a 2.4GHz wireless RF transceiver module with an integrated PA and LNA. It supports Enhanced ShockBurst (ESB) communication for simple point-to-point links. The module includes adjustable data rates and adjustable power levels. It also uses an external antenna and provides extended communication range. This NRF24L01+PA+LNA module is designed for RF communication projects and electronics applications.

Features of NRF24L01+PA+LNA Wireless RF Transceiver Module - 2.4GHz, 1km Range

• 2.4GHz ISM band operation
• Enhanced ShockBurst communication
• Adjustable data rates
• Adjustable power levels
• External antenna included
• Extended communication range

Specifications of NRF24L01+PA+LNA Wireless RF Transceiver Module - 2.4GHz, 1km Range

• Chipset: NRF24L01+PA+LNA
• Operating Frequency: 2.4GHz ISM band
• Modulation: GFSK (Gaussian Frequency Shift Keying)
• Communication Protocol: Enhanced ShockBurst (ESB) for easy point-to-point communication
• Operating Voltage: 1.9~3.6V recommended 3.3V (5V tolerant I/O pins) (dont use Arduino 3.3v pin for power it up)
• Communication Range: Extended range compared to basic NRF24L01 modules, with distances of up to 1,000 meters achievable in open space.
• Data Rate: Adjustable data rates, commonly used rates include 250kbps, 1Mbps, and 2Mbps.
• Maximum output power: +20dBm
• Receive Sensitivity 2Mbps mode: -92dBm
• Receive Sensitivity 1Mbps mode: -95dBm
• Receive Sensitivity 250Kbps mode: -104dBm
• TX mode current (peak): 115mA
• RX mode current (peak): 45mA
• Sleep mode current: 4.2uA
• PA Gain: 20dB
• LNA Gain: 10dB
• LNA noise figure: 2.6dB
• Antenna Gain (peak): 2dBI
• Output Power: Adjustable power levels for different communication ranges.
• External Antenna: Comes with an external antenna for improved signal strength and range.
• Interface: SPI (Serial Peripheral Interface) for communication with microcontrollers or other devices.
• Operating Temperature Range: -20°C to +70°C.
• Size: 15.3mm x 40.8mm.

How to Use NRF24L01+PA+LNA Wireless RF Transceiver Module - 2.4GHz, 1km Range

1. Connect the module using the SPI interface pins.
2. Provide power within the specified operating voltage range.
3. Set the desired data rate and power level for your application.

More Info

• Includes PA and LNA for extended communication range.
• Designed for wireless RF communication projects.