- +100 4 % $0.48
- +500 6 % $0.47
- +1000 8 % $0.46
- +5000 10 % $0.45
- +10000 12 % $0.44
IPX To SMA Female Converter Cable is a super handy for any designer of RF applications. Nowadays, most of electronic works are done in micro size and scale, so designers must save space as much as possible. By applying a pick-and-placeable U.FL connector (also called, IPEX, IPAX, IPX, MHF, and AM), you can do thi stuff but most antennas have SMA or RP-SMA connectors on them. So the designer needs an adapter or converter to bridge between these two terminals. The U.FL connector is the smallest RF connector. It's very tiny, which a mated connection of U.FL only stands 2.5mm high. U.FL connectors are suitable for high-frequency signals up to 6GHz and is usually used in applications where nothing else would fit.
This cable adapter is developed for the bridge between any Female SMA connector and U.FL connector.
This cable is used to connect the external antenna to all kinds of radio modules. One side of this conversion is screw type, panel-mount SMA female connector and the other side is IPEX connector.
Applications of IPX series include various types of wireless systems such as GPS, wireless routers, Bluetooth, MIMO, RFID, WiMAX, iBurst, UWB and Zigbee. But most Wi-Fi devices and routers have a connector use RP-SMA, which is not compatible with this converter cable.
It must be checked carefully the antenna you want to connect, and the close up image above to verify if you need RP-SMA or SMA as they are not compatible.
Features of UFL/IPX/IPEX to SMA Female Cable:
- Type: IPX To SMA
- Cable Diameter: 1.13mm
- Cable length: 150mm
- Wire resistance: 50 Ohm
- Maximum input power: 50 watts
- Working temperature: -40 to +85 degrees Celsius