ENC28J60 Ethernet Network Module - SPI Interface

Description
The ENC28J60 Ethernet Network module converts Ethernet input into SPI. The board and can be used to provide internet connectivity to microcontroller systems like Arduino boards over Ethernet. By small size and supporting SPI, it's applicable to a variety of projects. The board connects directly to most microcontrollers with a standard SPI interface by the transfer speed of up to 25MHz. The ENC28J60 Ethernet Module is an industry standard Serial Peripheral Interface (SPI) that's designed to utilize as an Ethernet network interface for any controller equipped with SPI. It is suitable for Arduino, SPI, AVR, PIC, LPC, STM32.

Features
Driver Chip: ENC28J60-I/SO
IEEE 802.3„¢ Compatible Ethernet Controller
Fully Compatible with 10/100/1000Base-T Networks
Integrated MAC and 10Base-T PHY
Supports One 10Base-T Port with Automatic Polarity Detection and Correction
Supports Full and Half-Duplex modes
Supply Voltage: 3.3V
Crystal Oscillator: 25 MHz
Ethernet Port: HanRun HR911105A
Size: 56mm x 34mm x 16mm