Add an Accessory:
Shop with confidence
Learn More
Description
The ESP8266 Witty Cloud ESP-12F WiFi Module is a powerful WiFi enabled processor in a compact package that incorporates an RGB LED, LDR light sensor and pushbutton for easy stand-alone operation.
The ESP8266 Witty Cloud ESP-12F WiFi Module is a powerful WiFi enabled processor in a compact package that incorporates an RGB LED, LDR light sensor and pushbutton for easy stand-alone operation.
Witty Cloud board is one of the cheapest ESP8266 device you can get on the market. It has a microUSB port with USB-Serial interface, which means no soldering! The board also contains an RGB LED and a button, which allows me to use it without a breadboard.
Besides adding WiFi capability, the main claim to fame for the ESP8266 processor over the AVR processor of the standard Arduino is that it has a larger 4 MB of Flash memory and runs at clock speeds of 80 MHz and can sometimes optionally be overclocked to 160 MHz and therefore has a fast processing speed.
This cheap and small Wifi transciever is the perfect solution for home Automation and IoT applications.
Besides adding WiFi capability, the main claim to fame for the ESP8266 processor over the AVR processor of the standard Arduino is that it has a larger 4 MB of Flash memory and runs at clock speeds of 80 MHz and can sometimes optionally be overclocked to 160 MHz and therefore has a fast processing speed.
This cheap and small Wifi transciever is the perfect solution for home Automation and IoT applications.
Features
Microcontroller: ESP-8266 32-bit
Clock Speed: 80 / 160MHz
USB Converter: CH340
USB Connector: Micro USB
Operating Voltage: 3.3V
Flash Memory: 4 MB
Digital I/O: 11
Analog Inputs: 1
Communications: Serial, SPI. I2C and 1-Wire via software libraries
WiFi: Built-in 802.11 b/g/n
LED: Built-in RGB LED
Light Sensor: Built-in LDR photoresistor
Buttons: Built-in pushbutton
Programming: Compatible with Arduino IDE and NodeMCU
Microcontroller: ESP-8266 32-bit
Clock Speed: 80 / 160MHz
USB Converter: CH340
USB Connector: Micro USB
Operating Voltage: 3.3V
Flash Memory: 4 MB
Digital I/O: 11
Analog Inputs: 1
Communications: Serial, SPI. I2C and 1-Wire via software libraries
WiFi: Built-in 802.11 b/g/n
LED: Built-in RGB LED
Light Sensor: Built-in LDR photoresistor
Buttons: Built-in pushbutton
Programming: Compatible with Arduino IDE and NodeMCU
LDR Lignt Sensor on board
WS2812 Led on board
3x tactile buttons (1x in the Witty board and 2x in theCH340 board)
Supports 3 modes: AP,STA,AP+STA
Dimensions: 24mm x 16mm
Micro USB connection for power and/or programming
Write Your Own Review
Customer Questions