ESP32 WiFi Bluetooth Development Board with 0.96 OLED Display

Description:

This development board is an ESP32 based board with WiFi and Bluetooth and a white 0.96 inch OLED display. The CP2102 USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection by which it can be programmed and/or powered. This board has the ESP32 chip with 4MB flash memory.

Specifications:

• ESP32 chip with 512kB RAM (240Mhz dual core processor)
• Up to 19x digital pins
• Up to 11x analog pins
• Two analog (DAC) outputs (pin 25 DAC1 and pin 26 DAC2)
• 1x SPI, 1x I2C, 1x UART (TX/RX)
• Pinout: see images
• Onboard voltage regulator for input voltage of (5-12V Vin pin)
• Micro USB connector (micro USB cable not included!)
• Loose headers included (not soldered)
• 0.96 inch white OLED screen (SDA pin: 5, SCL pin: 4, I2C address: 0x3C)
• Dimensions: 64 x 27.5mm x 7mm (without headers)