Dry Electrode Single-Lead Myoelectric Sensor EMG

The Dry Electrode Single-Lead Myoelectric Sensor EMG is a high-quality and versatile sensor for measuring muscle activity. With its dry electrode design, this sensor offers a comfortable and hassle-free experience, eliminating the need for gels or adhesives. It also has a compact and user-friendly design, making it suitable for various applications, from medical research to sports performance tracking.

The sensor integrates the filter and amplification circuit, amplifies the weak electrical signal of human surface muscle within a range of 1.5mV, and effectively suppress the noise (especially the frequency interference) by differential input and analog filter circuit. The output Signal is in the form of analog, with 1.5 V as reference voltage and 0 to 3.0 V from the output. The magnitude of the output signal depends on the The amount of activity of the selected muscle, the waveform of the output signal can significantly indicate the condition of the subcutaneous Muscle situator in the sensed position, facilitate the analysis and examination of myoelectric signal, detect muscle activity, such as Muscle density, strength, fatigue, etc.

The dry electrode electromyography sensor is an active sensor that provides high quality signal collection and is easy to use. Or Used in static or dynamic applications, it takes only some extremely simple preparation. The use of dry electrode guide, no conductive Gel also can get good signal quality, so with long service life, easy and convenient to use and so on, more suitable for ordinary users, and using the medical electrode of the gel probe is usually disposable, more inconvenient to use.

Specification of Dry Electrode Single-Lead Myoelectric Sensor EMG:

• Power supply voltage: +3.3V ~ 5.5V
• Working voltage: +5.0V
• Detection range: +/-1.5mV
• Electrode interface: 3.5mm headphone jack
• Module interface: Pin header 2.54mm-4P
• Board size: 24*39mm
• Operating temperature: 0 ~ 50 ° C
• Output range: 0 ~ 3.0V
• About EMG detection dry electrode card
• Electrode interface: 3.5mm headphone jack
• Electrode line length: 50cm
• Board size: 24*32mm
• Board weight: 42g

Usage attention:

• The power supply voltage is between 3.3 and 5.5V, the power supply current is not less than 50mA, and the ripple and other noises should be small. It is recommended to use a regulated DC voltage.
• The effective spectrum range of the EMG signal is 20Hz ~ 500Hz. It is recommended to use an analog-to-digital converter (ADC) with a resolution of not less than 8bit and an effective sampling rate of not less than 1KHz for sampling and digitization to preserve as much original information as possible.
• Use the matching metal dry electrode plate and hold the electrode plate in accordance with the muscle direction.
• This product is not a professional medical instrument and cannot be used as an auxiliary accessory to participate in diagnosis and treatment.