FT232H High Speed USB to JTAG UART/FIFO SPI/I2C Converter Module
- +25 4 % $12.70
- +50 6 % $12.43
- +100 8 % $12.15
- +300 10 % $11.88
- +500 12 % $11.60
Description
This module is a high-speed and multifunction external USB memory, which can achieve USB to UART (RS232, RS422 or RS485), FIFO, FT1248, JATG, SPI, I2C and so on. The chip of this module is FT232H. It is a single channel USB to serial/parallel ports that has various configurations. It has entire USB protocol handled on the chip, so there is no USB specific firmware programming required.
This module can be used as an external memory and a converter for Arduino, which is high-speed and multi-function.
It can achieve USB to various fast serial interfaces.
It also can simplify CPU interface design due to its CPU-style FIFO interface mode.
It is totally compatible with Hi-speed and full-speed.
Features
Chip: FT232H
High-Speed to UART/FIFO IC: 480Mb/s
Full Speed: 12Mbits/Second
UART Transfer Data Rate: 12Mbaud
USB to Asynchronous 245 FIFO Mode for Transfer Data Rate: 8 Mbyte/Sec
USB to Synchronous 245 Parallel FIFO Mode for Transfers: 40 Mbytes/Sec8. Supports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide).
CPU-Style FIFO Interface Mode Simplifies CPU Interface Design.
Fast Serial Interface Option.
FTDI’s Royalty-Free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
Adjustable Receive Buffer Timeout.
Interface: USB, JTAG, UART, FIFO, SPI, I2C
Pin Number: 24 Pins
Typical Applications:
Single-Chip USB to UART (RS232, RS422 or RS485)
USB to FIFO/FT1248/JTAG/SPI/I2C
USB to Fast Serial Interface
USB to CPU Target Interface (as memory) ·USB Instrumentation
USB Industrial Control
USB EPOS Control
USB MP3 Player Interface
USB FLASH Card Reader / Writers
Set-Top Box - USB interface
USB Digital Camera Interface
USB Bar Code Reader