The Arduino Portenta H7 is a high-performance development board tailored for industrial applications and advanced IoT projects. Powered by the STM32H747XI dual-core microcontroller, with Cortex®-M7 and Cortex®-M4 cores, this board enables simultaneous high-performance and low-power tasks. With integrated WiFi, Bluetooth, and an advanced GPU, it supports demanding applications like machine learning and real-time multimedia processing. The Portenta H7 also supports a wide range of peripherals, making it adaptable for various projects, from AI development to industrial automation.
Specifications of Arduino Portenta H7
-
Microcontroller: STM32H747XI dual Cortex®-M7 (480 MHz) + M4 (240 MHz)
-
Radio Module: Murata 1DX (WiFi 802.11b/g/n, Bluetooth Low Energy 5 and 4.2)
-
Secure Element: NXP SE0502 (default)
-
Power Supply:
-
Board Power: 5V (USB/VIN)
-
Battery: Li-Po Single Cell, 3.7V, 700mAh minimum (integrated charger)
-
Operating Voltage: 3.3V
-
-
Connectors:
-
Display: MIPI DSI host & MIPI D-PHY (low-pin count display interface)
-
Camera: 8-bit interface (up to 80 MHz)
-
High-Density Connectors: Two 80-pin connectors exposing all peripherals
-
MKR Headers: Compatible with industrial MKR shields
-
-
GPU: Chrom-ART graphical hardware accelerator™
-
Timers: 22x timers and watchdogs
-
Communication:
-
UART: 4x ports (2 with flow control)
-
Ethernet PHY: 10/100 Mbps (through expansion port)
-
USB-C: Host/Device, DisplayPort out, High/Full speed, Power delivery
-
-
Memory:
-
ADC: 3x ADCs, 16-bit resolution (36 channels, up to 3.6 MSPS)
-
DAC: 2x 12-bit DACs (1 MHz), with one accessible via A6 pin
-
SD Card: Interface through expansion port
-
-
Operating Temperature: -40°C to +85°C
-
Dimensions: Standard Portenta H7 form factor