Arduino Nano ESP32 [ABX00092]

Description of Arduino Nano ESP32:

Arduino Nano ESP32 is based on the efficient and well-known ESP32-S3 chip, combining the support of the Arduino ecosystem with the capabilities of ESP and support for both Arduino and MicroPython. The module gives endless possibilities in creating IoT projects, thanks to WiFi and Bluetooth communication. The u-Blox NORA-W106 (ESP32-S3) chip with a clock speed of up to 240 MHz, is equipped with 384 kB of ROM and 512 kB of SRAM. The board also has 128 MB (16 MB) of external Flash memory.

Features :

• Small dimensions : The Arduino Nano ESP32 board is designed in line with the previous models of the Nano family, making it ideal for applications in projects that require minimalism.
• Wireless communication : equipped with the ESP32-S3 chip that provides WiFi and Bluetooth connectivity, it is an ideal solution for IoT projects.
• Support for Arduino and MicroPython : seamlessly change the language from Arduino to MicroPython in a few simple steps. For more information on programming with MicroPython, see the documentation.
• Compatible with Arduino IoT Cloud : create IoT projects quickly and easily with just a few lines of code. The Arduino IoT Cloud app keeps you secure by allowing you to monitor and control your IoT project from anywhere.
• HID support : allows you to simulate a mouse and keyboard via USB. This feature allows you to create new ways to interact with your computer.
• Plug and Play Debugging : The board supports debugging via the Arduino IDE 2, without the need for external modules.

Specification of Arduino Nano ESP32:

• Chip: u-blox NORA-W106 (ESP32-S3)
• Clock speed: up to 240 MHz
• ROM memory: 384KB
• SRAM memory: 512KB
• External Flash Memory: 128MB (16MB)
• Connector: USB Type-C
• Leads:

• • built-in LED: pin 13
  • 14x digital inputs/outputs
  • 8x analog inputs
  • 5x PWM
  • external interrupts on all digital pins
• Wireless connectivity: WiFi / Bluetooth
• Interfaces:

• • UART: 1x, D0 (TX), DC (RX)
  • I2C: 1x, A4 (SDA), A5 (SCL)
  • SPI: D11 (COPI), D12 (CIPO), D13 (SCK), any GPIO as CS
• I/O Voltage: 3.3V
• Supply voltage: from 5 V to 18 V
• Source current per I/O pin: 40mA
• Sink current per I/O pin: 28 mA
• Dimensions: 45x18mm