MK2B RepRap Heated Bed (3D Printers)

The MK2B RepRap Heated Bed is designed for 3D printers that accept the RAMPS MK2B version of heatbed. It supports dual power input and can be used with 12V or 24V DC power supply sources. The front side includes a central mounting hole for three point mounting. A glass plate is highly recommended to provide a flat surface and added rigidity. The solder pads are enlarged to make component installation easier and support 1206 surface mount components. Proper strain relief is still required.

Features of MK2B RepRap Heated Bed - 214mm x 214mm, 200mm x 200mm, 12V/24V DC

• Compatible with RAMPS MK2B heatbed
• Dual power input support
• Three point mounting design
• Enlarged solder pads
• 1206 surface mount component support

Specifications of MK2B RepRap Heated Bed - 214mm x 214mm, 200mm x 200mm, 12V/24V DC

• Dimensions (Outer): 214mm x 214mm
• Dimensions (Heat Bed): 200mm x 200mm
• Laminate FR4 1.6±0.15mm
• 2 Layer, 35μm Copper
• Power Input: 12V/24V DC
• As the temperature rises, the current drops to 8.8A
• The maximum theoretical current is less than 5A
• ABS filament is not recommended

How to Use MK2B RepRap Heated Bed - 214mm x 214mm, 200mm x 200mm, 12V/24V DC

1. Install the heated bed on a 3D printer that accepts the RAMPS MK2B version of heatbed.
2. Use the three point mounting layout for leveling.
3. Level the side with two holes first, then fix it in place and level the side with one hole.
4. Use a glass plate if a flatter and more rigid surface is needed.

More Info

• Proper strain relief is required.
• ABS filament is not recommended.