38KHz Infrared Receiver Module

The 38KHz Infrared Receiver Module is a digital IR receiver sensor module for infrared signal reception. It is designed for remote control applications and wireless IR communication. This module operates at 38KHz and supports use with Arduino boards. It has low current consumption and an active-low output state. The module is suitable for projects that require receiving commands from an IR remote controller.

Features of 38KHz Infrared Receiver Module - 5V DC

• 38KHz infrared reception
• Remote control support
• Low current consumption
• Active-low output
• Arduino compatible
• Digital interface

Specifications of 38KHz Infrared Receiver Module - 5V DC

• Operating frequency: 38KHz
• Supply voltage: 5V DC
• Current consumption: Very low
• Active state: Logic 0
• Data switching rate: 1,200 times per second
• Compatibility: Compatible with Arduino boards
• Power supply: 5V
• Interface: Digital
• Modulate frequency: 38Khz
• Pin definitions: (1) Output (2) Vcc (3) GND
• Size: 23.5mm x 21.5mm

How to Use 38KHz Infrared Receiver Module - 5V DC

1. Connect the module to a 5V power supply.
2. Use the digital output, Vcc, and GND pins as required.
3. Integrate the module into an IR receiving circuit or Arduino project.
4. Use an appropriate decoder for IR remote controller signals.

More Info

• Infrared communication is used for wireless signal reception.
• Designed for projects that require IR remote control input.