Search results for: 'rf module arduino'

DRV8825 Stepper Motor Driver Features The DRV8825 module is used to drive a bipolar stepper motor. Only by two pins, you can control the rotation direction and rotation steps of the motor. By each signal sent by the spin step pin, the motor shifts one step. The key features are:This driver has 200 steps per revolution in full step (1.8 degrees per step).Allowable continuous current per phase without cooling: 1.5AMaximum current per 24V for each phase: 2.5AMotor voltage: 8.2 to 45VThe minimum allowed ...

1.8 Inch SPI TFT Color Display Features TFT display is a kind of liquid crystal LCD that is connected to each pixel using a transistor and it features low current consumption, high-quality, high-resolution and backlight. This 1.8 inch full color LCD has a narrow PCB screen. The resolution is 128x160 pixels and it has a four-wire SPI interface and white backlight. The driver is ST7735.This display also has a SD card slot. Note The operating voltage of this module is 3.3V and voltage divider is r...

X9C104 100K Digital Potentiometer Module Features The X9C104 digital potentiometer module is a variable resistor whose resistance value can be set digitally by a microcontroller. It consists of  3 output pins (RH، RW و RL) which can replace a mechanical potentiometer which has 3 pins. This module has 99 resistance components and its resistor is controlled by a 3-wire interface. X9C104 100K Digital Potentiometer Module Pinout This sensor has 10 pins:5 pins on the ...

Discover the power of the 1.3 inch OLED display module and its seamless integration with Arduino. With its impressive features and cutting-edge technology, this display promises to enhance your user experience. Learn how to interface this display module with Arduino using simple steps and bring your projects to life. Features OLED displays are high contrast, high-resolution and low-power displays, so they provide a good quality for users. There is no backlight on OLED, and it uses independent-illuminated pi...

5 Direction Joystick Button Module Features The 5 direction joystick button module is actually a combination of 5 pushbuttons that can be used in simple games. It is capable of connecting to a variety of microcontrollers. this module has 5 keys: Up, Down, Left, Right, Middle; And two additional keys: Set and Reset. This module works based on a common pin, COM. This means that by pressing each key, the related pin will connect to COM pin. 5 Direction Joystick Button Module Pinout This Module has 8...

ZMCT103C Current Transformer Module Features The ZMCT103C AC current transformer module can be used to monitor current in various applications. This module is based on ZMCT103C IC. The mechanism of this IC is that the wire whose current is to be measured, passes through the hole of the IC. Then, according to AC current, voltage is induced on both sides of IC.In this module, the output voltage of ZMCT103C IC is amplified by a series of amplifiers and can be used as the module output. The module outputs ...

1.3 INCH OLED IPS Display Module Features OLED displays offer many advantages in compare to LCDs and LEDs. These full color modules are high-quality. This 1.3 inch OLED display has SPI communication protocol. The resolution is 240x240, which means it contains 57,600 pixels. So, it enjoys a clear and transparent display quality. 1.3 INCH OLED IPS Display Module Pinout This module has 7 pins:GND: GroundVCC: Module power supply – 3.3 VSCL: SPI clockSDA: SPI dataRE...

LM393 Voltage Comparator Module Features The LM393 amplifier module can be used to compare an input voltage with a predetermined voltage level. The LM393 IC contains 2 op-amps that are completely independent. In LM393 comparator module, only one of the op-amps is used and the other is not connected. The module compares input voltage with the desired voltage level, and produces a digital output. The voltage level can be any value between the module positive and negative supply voltages. This voltage lev...

SS49E Linear Hall Effect Sensor Features The output of SS49E linear Hall sensor provides an analog voltage representing if a magnetic field is present. So, this small and versatile sensor can be used in systems containing permanent magnets or an electromagnets in order to monitor magnetic field change. The output voltage is in the range of 2.25V to 2.75V. In this sensor, amplifier, voltage regulator and logic switching circuits are used to overcome noise in the output. SS49E Linear Hall Effe...

MPU9250 9-Axis Gyro Accelerator Magnetometer Module Features The MPU9250 9-Axis Gyro Accelerator Magnetometer Module can provide acceleration, angle change and magnetic field on 3 axes x, y and z with high speed and accuracy. This module also features an embedded temperature sensor that can measure the temperature range between -40 to +85 degrees Celsius. The communication protocol of this module is I2C. MPU9250 9-Axis Gyro Accelerator Magnetometer Module Pinout Thi...