Search results for: 'interfacing'

2.0 INCH TFT DISPLAY Features This module is a 2-inch TFT LCD module with "220x176" resolution and 65K color display. It is suitable for Arduino Uno and Mega2560 development boards, and also supports SD card expansion function. The driver IC is ILI9225. You can download the datasheet of this module here.  [wpdm_package id='19870'] 2.0 INCH TFT Display Pinout This module has 8 pins:5V: Module power supply – 5VGND: GroundLCD_RST: LCD resetLCD_CS: LCD sele...

DS3231 RTC Module Features DS3231 real time clock module features high accuracy and low power consumption. This RTC module maintains seconds, minutes, hours, day, date, month, and year information. In this module, the date is set based on whether the month is 29, 30 or 31 days, and also whether it is leap year or not. This module can be used in 12-hour and 24-hour formats. Note The DS3231 module is available in two different types on the market. There is actually no difference between the two ...

2.8 INCH TFT LCD Display Features The TFT display is a kind of LCD that is connected to each pixel using a transistor and it features low current consumption, high-quality, high-resolution and backlight. This 2.8-inch full color LCD has a narrow PCB display. The resolution is 320x280 pixels and it has a four-wire SPI interface and white backlight. This display also has a touch screen and SD card slot. Note The module voltage is 3.3V and voltage divider is required to interface it with Arduino. ...

Focusable Red Line Laser Features This module emits a small intense focused beam of visible red light. This module can be used in fiber optic communications, laser test tools, surgical equipments, GPS tracking, etc. At the top of the laser there is a screw that is used to adjust the laser light. Some key features are:Operating voltage: 3VRequired current for module to be turned on: Less than 40mAOutput power: 5mWLaser wavelength: 650nm Note Since the required current is less than 40mA and the ...

Interfacing 3D Printer Ramps 20X04 LCD Smart Controller with Arduino Using this display, you don’t need a computer to control your 3D printer anymore. In this shield, an SD card is used to transfer the 3D designs to the 3D printer and store the G-Codes. This shield consist of a 20x04 Character Line LCD. Using the rotary encoder on the board, you can move in the device menu and access data. This display is compatible with ramps 1.4 controllers and can be run with marlin and repiter firmwares. ...

Discover the power of the 1.3 inch OLED display module and its seamless integration with Arduino. With its impressive features and cutting-edge technology, this display promises to enhance your user experience. Learn how to interface this display module with Arduino using simple steps and bring your projects to life. Features OLED displays are high contrast, high-resolution and low-power displays, so they provide a good quality for users. There is no backlight on OLED, and it uses independent-illuminated pi...

ZMCT103C Current Transformer Module Features The ZMCT103C AC current transformer module can be used to monitor current in various applications. This module is based on ZMCT103C IC. The mechanism of this IC is that the wire whose current is to be measured, passes through the hole of the IC. Then, according to AC current, voltage is induced on both sides of IC.In this module, the output voltage of ZMCT103C IC is amplified by a series of amplifiers and can be used as the module output. The module outputs ...

SS49E Linear Hall Effect Sensor Features The output of SS49E linear Hall sensor provides an analog voltage representing if a magnetic field is present. So, this small and versatile sensor can be used in systems containing permanent magnets or an electromagnets in order to monitor magnetic field change. The output voltage is in the range of 2.25V to 2.75V. In this sensor, amplifier, voltage regulator and logic switching circuits are used to overcome noise in the output. SS49E Linear Hall Effe...

0.96 INCH OLED Display Module Features OLED displays are high contrast and high-resolution displays, so they provide a good readability for users. There is no backlight on OLED, and it uses independent-illuminated pixels. So, it is thinner, low-power and more elegant in compare to LCDs. The driver chip is SSD1306, which provides SPI communication. You can download the datasheet of this module here.  [wpdm_package id='20547'] 0.96 INCH OLED Display Module Pinout...

GY-31 TCS3200 Color Sensor Features The TCS3200 color sensor uses 64 photodiodes to detect color. The output of this sensor is a square wave. Color intensity is obtained directly from the frequency of the square wave. These 64 photodiodes consist of 16 diodes with red filter, 16 diodes with green filter, 16 diodes with blue filter and 16 transparent photodiodes without filter. All 16 diodes of each type are connected in parallel. To detect any color, the photodiodes corresponding to that color are activ...