Search results for: 'tip'

Tip Do not forget to connect the VCC and the GND of the module to 5V and the GND of Arduino.

74HC4051 8-Channel Analog Multiplexer Features The 74HC4051 8-Channel analog multiplexer module can be used when there are many analog inputs in a circuit. In this case, one of these inputs needs to be selected and processed each time. This multiplexer can be used to select from 8 analog inputs. There are three S0-2 pins, which by giving appropriate values, one of the analog inputs is set as the output on the Z pin. 74HC4051 8-Channel Multiplexer Pinout This module ...

If you're looking to interface the CD74HC4067 16-Channel Multiplexer with Arduino, you've come to the right place. In this guide, we'll walk you through the features of the CD74HC4067 module, provide a pinout diagram, and explain the steps to connect it to an Arduino. By following this guide, you'll be able to effectively use the CD74HC4067 multiplexer in your analog input projects. CD74HC4067 16-Channel Multiplexer Features The CD74HC4067 16-Channel analog-digital multiplexer module can be used when there ...

Overview Have you ever wanted to use 2 sensors with the same I2C address at the same time, not knowing what to do? Faced some serious challenges in doing that? In a lot of projects, we have used different modules and sensors that support I2C communication protocol. Sometimes, we have interfaced some I2C modules with a microcontroller in our projects. If they all have different I2C addresses, we could easily interface them, facing no serious trouble. But, if 2 or more of the modules had the same I2C address...