Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nam viverra euismod odio, gravida pellentesque urna varius vitae. Sed dui lorem, adipiscing in adipiscing et, interdum nec metus. Mauris ultricies, justo eu convallis placerat, felis enim ornare nisi, vitae mattis nulla ante id dui. Ut lectus purus, commodo et tincidunt vel, interdum sed lectus. Vestibulum adipiscing tempor nisi id elementu sadips ipsums dolores uns fugiats gravida nam elit vols nulla dolores amet untras sitsers.
Donec volutpat nib...
Overview
In this tutorial, you’ll learn about the TCS230 sensor and how to use it with Arduino to recognize colors.
At the end of this tutorial, you’ll find a fascinating idea to create a color picker pen. With this pen, you can scan the colors of the objects around you, and start painting on an LCD using that color.
https://electropeak.com/learn/wp-content/uploads/2019/07/color-picker-cover-video4-2.m4v
What You Will Learn
An ...
Overview
In this tutorial, you’ll learn about the ultrasonic module and find out how it works. In the end, you’ll be able to connect it to the Arduino board and use it as a motion detector to control your monitor with hand gestures.https://electropeak.com/learn/wp-content/uploads/2019/08/Video-Original.compressed-2.m4v
What You Will Learn
What ultrasonic module is and how it works
How to use ultrasonic module with Arduino
...
FC-04 Sound Sensor Features
This module consists of a capacitive microphone and an amplifier circuit. The output of this module is analog. This module can be used to measure ambient noise. You can adjust the accuracy of the sensor by using a variable resistor on the device.
FC-04 Sound Module Pinout
FC-04 module has 3 pins:
VCC: Module power supply: 5 V
GND: Ground
OUT: Module output (Analog)
You can see the pinout in the following image.
Required Materials
Hardware C...
SRF05 Ultrasonic Module Features
SRF05 is an ultrasonic transmitter and receiver module used to measure distance. The sensor operation is very simple. You only need to measure the return time of ultrasonic waves in order to measure the distance. Then you should divide measured time by 2 and multiply by the sound speed. The sensor measuring range is about 2 to 400 cm.
You can download the datasheet of this module here.
[wpdm_package id='17336']
SRF05 Ultrasonic Module Pinout
This sensor has 3 pi...
801S Vibration Module Features
The 801S vibration sensor module has a digital output pin that gives HIGH output by detecting vibration up to a certain threshold. The sensitivity of this sensor can be adjusted with a potentiometer on the module. The IC on this module is LM358. This module can be used in security systems.
Note
The module's sensitivity is very high.
You can download the datasheet of this module here.
[wpdm_package id='17349']
801S Vibration Module Pinout
This sensor has 3 pins:
...
KY-031 Knock Module Features
This module is a spring-based sensor that sends a HIGH signal when a vibration is detected. It can be widely used in security systems, or monitoring. You can easily use it with the Arduino board or any other microcontroller.
Tip
It is recommended to use microcontroller interrupt pins in order to increase accuracy.
You can download the datasheet of this module here.
[wpdm_package id='17426']
KY-031 Knock Module Pinout
This sensor has 3 pins:
VIN: Module power...
GP2Y1010AU0F Dust Module Features
The GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air. It is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems.
You can download the datasheet of this module here.[wpdm_package id='18191']
...
