Search results for: 'proximity sensor arduino'

AP3216 Sensor Features The AP3216C is an integrated ALS & PS module that includes a digital ambient light sensor [ALS], a proximity sensor [PS], and an IR LED in a single package. This module is well suited to applications under clear glass or darkened glass. The proximity function is targeted specifically towards near field application and detects external object with simple configurable zone controlled by registers.  Note You need a 220 to 470 ohm resistor to interface this module. ...

CJMCU-0201 Double Touch Sensor Features A touch sensor is a type of switch that only has to be touched by an object to operate. Touch sensors work completely similar to a switch. This sensor has two separate pads and can be used as two separate switches. Note When this switch is subjected to touch, the output voltage will be HIGH, otherwise it is LOW. Note The output current is very low (about 40 mA). If you want to connect a higher current device to this switch, you must add a rela...

Inductive Proximity Sensor LJ12A3-4-Z/BY Features A proximity sensor is a sensor able to detect the presence of nearby objects. The inductive proximity sensor LJ12A3-4-Z / BY has three pins, two of which are connected to a supply voltage of 6 to 36V. The output pin is PNP and NO (Normally Open). That is, it is normally Low and when it detects an object, it is HIGH. The detection distance is 4 mm and it can only detect metal objects such as copper, aluminum, iron, etc. Note Because the operatio...

APDS-9930 Ambient Light Sensor Features This module consists of ambient light , IR and proximity sensors. The detection distance is up to 100 mm. The APDS-9930 sensor measures the ambient light. This sensor can also detect 0.01 Lux brightness in the dark. It can also be used behind dark glass like a mobile screen. For example, it turns off the touch screen during voice calls when your ear is close to the screen.This sensor can be used to adjust the brightness of mobile backlight and the approp...

LJ12A3-4-Z/BX Inductive Proximity Sensor Features Proximity sensors are used to detect the presence of nearby objects. The LJ12A3-4-Z / BX sensor has three pins, two of which are connected to a supply voltage of 6 to 36 V. The output pin is PNP and NO (Normal Open). That is, it is normally Low and when it detects an object, it becomes HIGH. The detection distance is 4 mm, and it can only detect metal objects such as copper, aluminum, iron, etc. Note Since the operation voltage is more than 5 V,...

Introduction If you are interested in sensors, you are probably familiar with proximity detection sensors. There are various sensors available for proximity detection; each with its own capabilities and limitations. One method is to use the infrared transceivers. These sensors measure the time it takes for an infrared beam to travel back and forth and calculate the distance between the sensor and the target surface.In this tutorial, we’ll introduce the TMD27713 distance detection sensor. Whether you...