DS18B20 Temperature Sensor Features
The DS18B20 is a temperature sensor that can measure temperature in the range of -55°C to + 125°C with an accuracy of 0.5 ° C. The output accuracy of this sensor is adjustable from 9 to 12 bits which is set to 12 bits by default.
The communication protocol of the this sensor is single-wire, and to measure the ambient temperature you only need to connect one wire to Arduino.
Note
One of the biggest advantages of this sensor is its one-wire communication protocol....
MPS20N0040D Pressure Module Features
The MPS20N0040D Pressure and Altitude Sensor Module is an MPS20N0040D pressure sensor that receives altitude data and transmits it to the HX710 IC, which is an ADC converter. This module is used to measure the ambient pressure and the pressure difference of liquid levels.
Note:
This module does not support I2C communication.
You can download the datasheet of this module here.[wpdm_package id='17459']
MPS20N0040D Pressure ...
YF-S201C Water Flow Sensor Features
YF-S201C is a sensor used to measure the water flow. This water flow sensor mainly consists of a plastic valve body, rotor assembly, and hall effect sensor. This module works based on the hall magnetic effect. So when water flows through the rotor assembly, the rotor will rotate and the hall effect sensor will produce an electric pulse. By counting these generated pulses, the amount of water passing through the sensor can be calculated.The measuring range of water fl...
YF-S201 Water Flow Sensor Features
YF-S201 is a sensor used to measure the water flow. This water flow sensor mainly consists of a plastic valve body, rotor assembly, and a hall effect sensor. This module works based on the hall magnetic effect. So when the water flows through the rotor assembly, the rotor will rotate and the hall effect sensor will produce an electric pulse. By counting these generated pulses, the amount of water passing through the sensor can be calculated.The measuring range of wat...
SW-520D Tilt Sensor Module Featurs
A SW-520D Tilt Sensor is an electronic device that detects the orientation of an object and gives its output High or Low accordingly. Basically, it has a metallic ball inside it which moves and makes the circuit. The sensor's sensitivity is at 10 degrees tilt.
This module has two output pins for each path. When tilt angle is more than 10 degree, the output is low.
Note
The output is on trigger mode.
You can download the datasheet of this module ...
