Search results for: 'motors drive'

Overview In this tutorial, you will learn how to drive DC, stepper and servo motors using an Arduino L293D motor driver shield. What You Will Learn General information about DC motors Introduction to L293D motor shield Driving DC, Servo & Stepper motors Motors & Drivers Motors are an inseparable part of many robotics and electronics projects and have different types you can use depending on their application. Here is some information about different...

L298N DC Motor Driver Feature L298N module is used to drive DC motors with a current of less than 2 amps. This module is easy to use. It contains convenient filter circuit and have access to inputs and outputs via pin headers and terminals. The L298N is a dual full-bridge motor driver that allows two DC motors to be connected simultaneously. Note The L298N motor controller follows the H-bridge configuration, so it can be used to drive stepper motors too. This driver needs a logic voltage supply to drive t...

MX1508 Motor Driver Module Features The MX1508 driver is one of the cheapest drivers for running DC motors with a maximum current of 2 amps. Small dimensions and simple setup are the positive features of this module. The MX1508 is a dual full-bridge motor driver that allows two DC motors to be connected simultaneously. Note The MX1508 motor controller follows the H-bridge configuration, which is handy to drive a stepper motors.This driver has a temperature protection circuit that disables the d...

L298N Motor Driver Module Features The L298N module is used to drive DC motors with a maximum current of 2 amps. The L298N driver module is easy to use. It contains a good filter circuit and gives you access access to inputs and outputs via pin headers and terminals. The L298N is a dual full-bridge motor driver that allows two DC motors to be connected simultaneously. Note The L298N motor controller follows the H-bridge configuration, which is handy to drive a stepper motors. This driver needs a logic vo...

TB6612FNG Dual Motor Driver Features Today, controlling the speed and direction of DC motors is very important due to their many applications. The most common method of controlling DC motors is the H-Bridge. This method allows you to control both the speed and the direction of the engine. The TB6612FNG dual module uses the same method to control two motors.One of the control pins of this module is PWM. This pin is connected to the gate of the transistor. The longer the duty cycle, the higher the voltag...