Search results for: 'module temperature'

DS18B20 Temperature Module Features DS18B20 module is a temperature sensor that can measure temperature in the range of -55°C to + 125°C with an accuracy of 0.5 ° C. The output accuracy of this sensor is adjustable from 9 to 12 bits which is set to 12 bits by default. The communication protocol of this sensor is one-wire, and to measure the ambient temperature you only need to connect one wire to Arduino. Using this module is quite similar to the DS18B20 Sensor since it based on that component. Note One...

SI7021 Temperature and Humidity Sensor Features The SI7021 humidity and temperature sensor is a CMOS integrated sensor with I2C communication protocol. This sensor is factory calibrated and calibration data is stored in an on-chip non-volatile memory.This sensor is used in various applications such as thermostat and humidistats, respiratory therapy, Indoor weather stations, tablets, mobile phones, etc.Humidity measurement range: 0 to 100%RH - Accuracy 3%RHTemperature measuring range: -40°C to +125°C ...

BME280 Sensor Module Features The BME280 sensor module is a high-accuracy module for measuring temperature, humidity and atmospheric pressure. The key features are:Temperature Measuring range: -40 to +80 degrees Celsius; Accuracy: 1 degree Celsius In the range of 0 to +65 and 1.5 degrees Celsius out of this rangehumidity: 0-100%RH; Accuracy: 3%RH.pressure: 330hPa to 1100hPa. Accuracy: 1hPaThis module also calculates altitude indirectly using atmospheric pressure. The communication protocol of this sens...

What is AM2301 Sensor? The AM2301 module is an internally-calibrated digital sensor that measures temperature and humidity. It can measure humidity from 0 to 99.9% with an accuracy of ±2% and temperatures from -40 to 80°C with an accuracy of ±3°C.This digital module uses a single-wire protocol for communication. So, apart from the power supply pins, it only needs one digital pin to communicate with the microcontroller. Using this protocol, we can transfer data through this line for a maximum distanc...

XY-TR01 Digital Temperature & Humidity Control Module The XY-TR01 Digital Temperature and Humidity Thermostat Module is great for controlling humidity and temperature. It has a digital sensor called SHT20. In addition, its user interface comes with a digital display to show data and four control buttons to adjust humidity and temperature. The module also has two separate relays (maximum current: 10A) to independently control the cooling/heating and humidification/dehumidification m...

Introduction The KY-028 module contains a thermistor sensor that measures the ambient temperature. The resistance of the thermistor varies inversely with temperature. In addition, the analog and digital output pins provide the sensor's data. When the value measured by the sensor exceeds the threshold, the digital pin goes HIGH, lighting up the LED on the module. Tip You can adjust the digital output threshold using the blue potentiometer on the module. KY-028 Pi...