Search results for: 'light'

BH1750FVI Sensor Features BH1750FVI (or BH1750) is a calibrated digital light sensor IC that measures the incident light intensity and converts it into a 16-bit digital number. The BH1750FVI sensor directly gives digital output. The sensor output can be accessed through an I2C interface. It can measure ambient light intensity and the measurement unit is Lux. Interfacing this module with Arduino is quite easy. You can download the datasheet of this module here. [wpdm_package id='17132'] BH1750 ...

TEMT6000 Sensor Features The TEMT6000 sensor is an analog sensor which has a function similar to NPN transistor. The sensor is designed to mainly detect the light spectrum visible to the human eye with peak sensitivity. If the light intensity increases or decreases, it will react properly. This sensor is too sensitive and react to slightest changes in a wide brightness range. Note This sensor does not react well to IR and UV light. You can download the datasheet of this sensor here.  [wpdm_...

AP3216 Sensor Features The AP3216C is an integrated ALS & PS module that includes a digital ambient light sensor [ALS], a proximity sensor [PS], and an IR LED in a single package. This module is well suited to applications under clear glass or darkened glass. The proximity function is targeted specifically towards near field application and detects external object with simple configurable zone controlled by registers.  Note You need a 220 to 470 ohm resistor to interface this module. ...

OE-TP Light Touch Switch Module Features This module has a fingerprint sensor that can control the digital output voltage. So The output voltage will change with each touch. The operating voltage is 5 to 20 V (recommended 12 volts) and operating current is up to 3 A (peak 10 A). It also has two red and blue LEDs. The blue LED indicates the module is powered on and the red LED indicates touch detection.This type of sensor is widely used in home lighting, motor speed control, toys, etc. ...

APDS-9930 Ambient Light Sensor Features This module consists of ambient light , IR and proximity sensors. The detection distance is up to 100 mm. The APDS-9930 sensor measures the ambient light. This sensor can also detect 0.01 Lux brightness in the dark. It can also be used behind dark glass like a mobile screen. For example, it turns off the touch screen during voice calls when your ear is close to the screen.This sensor can be used to adjust the brightness of mobile backlight and the approp...