Search results for: 'las'

Vestibulum egestas pharetra felis. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Suspendisse dignissim bibendum lectus, quis ornare tortor elementum quis. Aenean semper vehicula elementum. Nulla massa est, faucibus non semper quis, laoreet et sapien. Suspendisse massa odio, aliquet nec commodo et, venenatis ut velit. Pellentesque mauris lorem, dictum vitae feugiat quis, placerat vitae eros. Vestibulum quis purus vel urna convallis faucibus. Etiam vel mauris nisi...

Liquid Level Float Switch Features The liquid level float switch is a very simple sensor that works like a switch. This sensor places vertically, floating on water. The float is located on a pipe that can move on the liquid surface. It works based on the magnetic field. Note Until you have not placed the sensor on the liquid surface, the switch is closed and when the sensor is placed on the liquid, the float moves on the pipe and goes up and the switch remains open. ...

VL53L0X Distance Sensor Features The VL53L0X sensor is a laser rangefinder. First, the sensor sends a laser pulse, and the distance from object to the sensor is estimated by measuring the travel time of the laser pulse. Due to the very high speed of light, this sensor is not used in applications less than a millimeter. This module can measure a maximum distance of 2 meters. The operating voltage is 2.8 to 5 volts and it uses the I2C protocol to communicate with the microcontroller. You can down...

KY-008 Laser Transmitter Module Features This Laser module emits a small intense focused beam of visible red light.  The operating voltage is 3-5 V and the required current is 40mA. Note Since the required current is 40 mA and the Arduino pins can supply this current, this module can be connected directly to Arduino. If need be more than 40mA, direct connection to Arduino will damage the Arduino. In that case, you need to use a laser driver to connect the laser module to Arduino. ...

Focusable Red Line Laser Features This module emits a small intense focused beam of visible red light. This module can be used in fiber optic communications, laser test tools, surgical equipments, GPS tracking, etc. At the top of the laser there is a screw that is used to adjust the laser light. Some key features are:Operating voltage: 3VRequired current for module to be turned on: Less than 40mAOutput power: 5mWLaser wavelength: 650nm Note Since the required current is less than 40mA and the ...

Dot Laser Diode Module Features This module emits a small intense focused beam of visible red light. This module can be used in laser toys, wireless telecommunications, signal equipments, etc.Operating voltage: 5VRequired current for module to be turn on: Less than 40mAOutput power: 5mWLaser wavelength: 650nmWire length: Max 120mm Note Since the required current is less than 40mA and the Arduino pins can supply this current, so this module can be connected directly to Arduino. If it were more ...

Features of VL53LXX Laser-Ranging Module The VL53L1X sensor module is a laser-ranging sensor based on Time-of-Flight (ToF). The ToF method measures the distance to the object by measuring a wave’s total travel time (between the sensor and the object). With a maximum frequency of 50Hz, the VL53L1X sensor can measure distances up to a range of 4 meters.This low-power module is controlled through the I2C interface.In this module, unlike previous generations of distance measuring modules, IR and optic fil...

Introduction The BIOS, or Basic Input/Output System, is a firmware that controls the boot process and the hardware settings of your computer. Sometimes, you may need to update or repair the BIOS to fix some issues or improve the performance of your computer. However, flashing the BIOS can be risky, as it may cause your computer to become unbootable or unstable if something goes wrong. One of the tools that you can use to flash the BIOS safely and easily is the CH341A programmer, which is a cheap and ve...