Search results for: 'digital module'

PCF8591 AD/DA Features The PCF8591 is a single-chip, single-supply low power 8-bit CMOS data acquisition device. This chip has four analog inputs, one analog output, and a serial I2C-bus interface.The PCF8591 module has 4 pins on the left, which include the power pins and the I2C connection pins. The 8 right pins with 4 jumpers on them also work with signals: AOUT: Module DAC output interface AINO: chip analog input interface AIN1: chip analog input interface AIN2: chip analog input interface AIN3:...

Overview In this tutorial, you will learn about the load cell module, its applications and its operation. Also, you’ll see how to use the load cell module with Arduino. Then after learning about calibrating the load cell, you will create a digital scale that can measure the weight with an accuracy of 0.0001 grams and also a force gauge. What You Will Learn What load cell is and how it works How to use the load cell module with Arduino Build a digital scale with Ardu...

Overview In some electronics projects, we need to know the geographic location at any moment and do a specific operation accordingly. In this tutorial, you’ll learn how to use the LSM303DLHC GY-511 compass module with Arduino to make a digital compass. First, you’ll learn about this module and how it works, and then you’ll see how to interface the LSM303DLHC GY-511 module with Arduino. What You Will Learn What compass module is? ...

ADXL345 Accelerometer Module Features ADXL345 accelerometer sensor can measure angle orientation and object path. The sensor can do that in three X, Y and Z axes. It can also measure dynamic and static acceleration forces. Dynamic acceleration force is due to motion and vibration and static acceleration is caused by gravity. The sensitivity range of the ADXL345 accelerometer sensor is from +-2g to +-16g. (g is approximately 9.8) For example, when this sensor is placed on a flat surface, its value is +1...

X9C103S Digital Potentiometer Module Features The X9C103S 10k digital potentiometer module is a variable resistor whose resistance value can be varied digitally from a microcontroller. It consists of a 3-pin output which can replace a mechanical potentiometer which has 3 pins. This module has 99 resistance components and the final resistor is controlled by a 3-wire interface. X9C103S Digital Potentiometer Module Pinout This sensor has 8 wires:VCC: Module power suppl...

X9C104 100K Digital Potentiometer Module Features The X9C104 digital potentiometer module is a variable resistor whose resistance value can be set digitally by a microcontroller. It consists of  3 output pins (RH، RW و RL) which can replace a mechanical potentiometer which has 3 pins. This module has 99 resistance components and its resistor is controlled by a 3-wire interface. X9C104 100K Digital Potentiometer Module Pinout This sensor has 10 pins:5 pins on the ...

An Introduction to WX-101W Module The WX-101W module is one of the oldest and most popular thermostats on the market. It's a great option for temperature control in many projects due to its several features and simple design and use.It also has a digital seven-segment display that shows the temperature value with a resolution of 0.1°C. In addition, there are three buttons for controlling and settings, as well as an output terminal for turning on/off an external actuator such as a heater.To work with th...

XY-TR01 Digital Temperature & Humidity Control Module The XY-TR01 Digital Temperature and Humidity Thermostat Module is great for controlling humidity and temperature. It has a digital sensor called SHT20. In addition, its user interface comes with a digital display to show data and four control buttons to adjust humidity and temperature. The module also has two separate relays (maximum current: 10A) to independently control the cooling/heating and humidification/dehumidification m...