Search results for: 'current module'

ACS712 Current Module Features ACS712 chip is used to measuer DC/AC current based on the Hall effect. This chip is produced in 3 models with different maximum currents. Different models and output sensitivity of each model are shown in the table below: Sensor sensitivity means that, for example, if you use 5 amp model, as input current increase 1 amp, the output voltage of the sensor increases about 185 mV. Note When input is not connected to something and th...

ZMCT103C Current Transformer Module Features The ZMCT103C AC current transformer module can be used to monitor current in various applications. This module is based on ZMCT103C IC. The mechanism of this IC is that the wire whose current is to be measured, passes through the hole of the IC. Then, according to AC current, voltage is induced on both sides of IC.In this module, the output voltage of ZMCT103C IC is amplified by a series of amplifiers and can be used as the module output. The module outputs ...

If you're looking to interface the INA219 current sensor module with an Arduino, you've come to the right place. In this guide, we'll walk you through the necessary steps to get your setup up and running smoothly. INA219 Current Sensor Module Features The INA219 module is used to measure both current and voltage at the same time. This module uses I2C communication to transfer the voltage and current data. Other features: Measurement accuracy: 1% Maximum measured voltage: 26V Maximum measured current...