Search results for: 'axis module'

MPU9250 + BMP280 Module Features This IMU module is a small board which all the sensors required for 10 degrees of freedom are placed in. This module communicates with the Arduino or microcontrollers via the I2C interface. Using the existing FreeIMU functions and source code, you can easily use this IMU as an AHRS system in flight controls. You can use this module in VTOLs, model airplanes, UAVS, and also industrial and medical devices. GY-91 Module Pinout This s...

MPU9250 9-Axis Gyro Accelerator Magnetometer Module Features The MPU9250 9-Axis Gyro Accelerator Magnetometer Module can provide acceleration, angle change and magnetic field on 3 axes x, y and z with high speed and accuracy. This module also features an embedded temperature sensor that can measure the temperature range between -40 to +85 degrees Celsius. The communication protocol of this module is I2C. MPU9250 9-Axis Gyro Accelerator Magnetometer Module Pinout Thi...

GY-801 IMU Module Features The GY-801 sensor module is a precise 9-axis sensor which includes L3G4200D (Gyroscope), ADXL345 (Accelerometer), MMC5883MC (Magnetometer) and BMP180 (Barometric Pressure/Temperature) ICs.All these ICs use I2C protocol for communication. This module is also used in the development of ground and flying robots. To download the datasheet of GY-801 module, click here.[wpdm_package id='22867']To download the datasheet of L3G4200D sensor, click here.[...

What is ADXL375 Accelerometer Module? The ADXL375 module is an ultra-accurate 3-axis accelerometer sensor. This accelerometer can measure up to 200 g of force in three axes (X Y Z) (g: the gravity acceleration, which is around 9.8 meters per square second. In simpler words: nearby the acceleration of a spaceship rocket!!!)Other useful features: I2C and SPI interfaces for communication as well as two interrupt pins that can be configured independently.ADXL375 is an advanced version of ADXL345 and ADXL343...

GY-25 Module Features The GY-25 sensor module is a high-resolution 3-axis sensor based on the MPU6050 sensor. It includes a 3-axis gyroscope and a 3-axis accelerometer, all in the MPU6050 sensor chip. The GY-25 module also has a microcontroller called the 32F030F4P6. Its role is to process and convert data from the MPU6050 sensor to obtain the angle value. The microcontroller and Arduino board communicate with the GY-25 module through the UART interface. In addition, the GY-25 module has an I2C interface fo...