Search results for: 'and mi'

Overview  In this tutorial, you’ll learn about IR protocol and how to use the IR receiver Module. First, you’ll see how the IR protocol works, and then you will learn to use an IR remote control kit with Arduino. Some practical examples are also provided to help you learn it better.https://electropeak.com/learn/wp-content/uploads/2019/06/super-mario-optimized.mp4 What You Will Learn What IR is and how it works Introduction of...

AP3216 Sensor Features The AP3216C is an integrated ALS & PS module that includes a digital ambient light sensor [ALS], a proximity sensor [PS], and an IR LED in a single package. This module is well suited to applications under clear glass or darkened glass. The proximity function is targeted specifically towards near field application and detects external object with simple configurable zone controlled by registers.  Note You need a 220 to 470 ohm resistor to interface this module. ...

APDS-9930 Ambient Light Sensor Features This module consists of ambient light , IR and proximity sensors. The detection distance is up to 100 mm. The APDS-9930 sensor measures the ambient light. This sensor can also detect 0.01 Lux brightness in the dark. It can also be used behind dark glass like a mobile screen. For example, it turns off the touch screen during voice calls when your ear is close to the screen.This sensor can be used to adjust the brightness of mobile backlight and the approp...

SI7021 Temperature and Humidity Sensor Features The SI7021 humidity and temperature sensor is a CMOS integrated sensor with I2C communication protocol. This sensor is factory calibrated and calibration data is stored in an on-chip non-volatile memory.This sensor is used in various applications such as thermostat and humidistats, respiratory therapy, Indoor weather stations, tablets, mobile phones, etc.Humidity measurement range: 0 to 100%RH - Accuracy 3%RHTemperature measuring range: -40°C to +125°C ...

SHT10 Temperature Humidity Sensor Features The SHT10 module is a high accuracy sensor for measuring temperature and humidity. This module can be easily connected to a variety of microcontrollers using two digital output pins. One for data transfer and the other for adjusting data transfer speed between the module and the microcontroller. The range of temperature measurement is -40 to +123.8 degrees Celsius with 0.01 degrees Celsius accuracy. The humidity range is 0 to 100% with 0.05% accuracy. This module i...

BME280 Sensor Module Features The BME280 sensor module is a high-accuracy module for measuring temperature, humidity and atmospheric pressure. The key features are:Temperature Measuring range: -40 to +80 degrees Celsius; Accuracy: 1 degree Celsius In the range of 0 to +65 and 1.5 degrees Celsius out of this rangehumidity: 0-100%RH; Accuracy: 3%RH.pressure: 330hPa to 1100hPa. Accuracy: 1hPaThis module also calculates altitude indirectly using atmospheric pressure. The communication protocol of this sens...

MTH02 Temperature and Humidity Sensor Features There are various types of temperature and humidity sensors on the market in terms of price, accuracy and measurement range. The MTH02O is one the smallest type of these sensors. This sensor uses a digital pin to transfer the temperature and humidity data.Features:Low power consumptionSmall sizetemperature Measurement range: -40°C to +70°C with 0.5°C accuracyHumidity range: 18% to 98% with 3% accuracyApplication:HVACConsumer ProductsTesting and measur...

SHT20 Temperature and Humidity Sensor Features The SHT20 temperature and humidity module is high-precious, full calibrated, with very low power consumption and high response speed. This sensor is a combination of a capacitive humidity sensor and a silicon band gap temperature sensor. The key features are:Temperature measurement range: -40 to +125 °CTemperature measurement accuracy: 0.3 °CHumidity measurement range: 0 to 100%Humidity measurement accuracy: 3% RHCommunication Protocol: I2C ...