DS18B20 Temperature Sensor Features
The DS18B20 is a temperature sensor that can measure temperature in the range of -55°C to + 125°C with an accuracy of 0.5 ° C. The output accuracy of this sensor is adjustable from 9 to 12 bits which is set to 12 bits by default.
The communication protocol of the this sensor is single-wire, and to measure the ambient temperature you only need to connect one wire to Arduino.
Note
One of the biggest advantages of this sensor is its one-wire communication protocol....
DS18B20 Temperature Module Features
DS18B20 module is a temperature sensor that can measure temperature in the range of -55°C to + 125°C with an accuracy of 0.5 ° C. The output accuracy of this sensor is adjustable from 9 to 12 bits which is set to 12 bits by default.
The communication protocol of this sensor is one-wire, and to measure the ambient temperature you only need to connect one wire to Arduino.
Using this module is quite similar to the DS18B20 Sensor since it based on that component.
Note
One...
E18-D80NK Infrared Obstacle Avoidance Sensor Features
The E18-D80NK sensor is used to detect obstacles and objects. This sensor works based on transmitting infrared rays. First, the transmitter sends the rays in a direct path. This ray hits the obstacle and returns to the receiver. There is a potentiometer on this module that can be adjusted to change this detection distance from 3 to 80cm. In fact, with this sensor, the obstacle can be detected, but the distance cannot be calculated directly. There is also...
Overview
In many projects such as flying robots, weather stations, improving routing performance, sports etc. measuring pressure and altitude is very important. In this tutorial, you’ll learn how to use the BMP180 sensor, which is one of the most commonly used sensors for measuring the pressure.
https://electropeak.com/learn/wp-content/uploads/2019/07/Bmp-Cover-Video.compressed-2.m4v
What You Will Learn
What the barometric pressure is.
What the BOSCH BMP180 pressure sensor is.
...
SW-18010P Vibration Sensor Module Features
The SW-18010P sensor is used to detect vibration. The sensor has a small spring inside a metal tube. When the sensor vibrates, the spring hits the metal tube and the sensor will be activated.This sensor has two digital and analog outputs. When the sensor vibrates, the digital output changes from HIGH to LOW and the analog output changes from 1023 to 0.Other features:Operating voltage: 3.3V to 5VIncluding a fixed hole on board for easy installationPotentiome...
DX-BT18 Bluetooth Module Features
Bluetooth modules are a type of wireless communication modules that can be added to a project through serial or SPI communication protocols.The advantage of using Bluetooth modules is that they are easy to set up and use.The DX-BT18 module uses serial protocol for communication.
Note
All Bluetooth modules that use serial communication protocol support AT Commands, which are listed in the datasheet of each product.
Download th...
