Search results for: 'so 1'

If you're looking to interface the INA219 current sensor module with an Arduino, you've come to the right place. In this guide, we'll walk you through the necessary steps to get your setup up and running smoothly. INA219 Current Sensor Module Features The INA219 module is used to measure both current and voltage at the same time. This module uses I2C communication to transfer the voltage and current data. Other features: Measurement accuracy: 1% Maximum measured voltage: 26V Maximum measured current...

GUVA-S12SD UV Sensor Module Features Ultraviolet (UV) light is produced by sunlight. Gradual thinning of Earth's ozone layer has increased the amount of UV radiation which can lead to sunburn and other problems. UV radiation is a form of electromagnetic radiation with wavelength from 200 nm to 370 nm, shorter than that of visible light, but longer than X-rays. The GUVA-S12SD UV sensor module is used for detecting the intensity of ultraviolet radiation. This module has an analog output that changes wit...

ML8511 UV Sensor Module Features Most electrical devices, such as desktop computers, cell phones, TV monitors, etc are sources of ultraviolet radiation. Ultraviolet radiation can cause many skin diseases and burns. Therefore, it is essential to know the amount of UV light in the environment. The ML8511 UV sensor module can be used to calculate the intensity of UV light in the environment. This sensor is quite easy to use. It outputs an analog voltage that changes linearly according to th...

MTH01 Temperature and Humidity Sensor Features The MTH01 sensor module is a suitable sensor for measuring ambient temperature and humidity. This module actually consists of two sensors: an NTC type high precision temperature sensor and a resistive type relative humidity sensor. It can communicate to different microcontrollers through SPI interface. The key features of this module are:Temperature measurement range: -40 to +70 degrees CelsiusTemperature measurement accuracy: 0.5 degrees CelsiusHumidity m...

What is AM2301 Sensor? The AM2301 module is an internally-calibrated digital sensor that measures temperature and humidity. It can measure humidity from 0 to 99.9% with an accuracy of ±2% and temperatures from -40 to 80°C with an accuracy of ±3°C.This digital module uses a single-wire protocol for communication. So, apart from the power supply pins, it only needs one digital pin to communicate with the microcontroller. Using this protocol, we can transfer data through this line for a maximum distanc...