Search results for: 'sen'

MPL3115A2 Pressure/Altitude Sensor Features The MPL3115A2 pressure and altitude sensor is a MEMS pressure sensor that generates altitude data. The sensor outputs are converted to digital data by high-resolution 24bit ADC and transfer over I2C, which means that this module easily communicates with most microcontrollers. The unit of pressure and height is Pascal and meter respectively. The module also measures 12-bit temperature in degrees Celsius. MPL3115A2 Module Pinout ...

LPS331AP Pressure/Altitude Module Features This small board has an LPS331AP pressure sensor or barometer. The communication protocol of this module is I2C and SPI. In addition to measuring pressure and altitude, this module can also measure temperature. LPS331AP Sensor Pinout This sensor has 9 pins. 4 pin are more useful:+5V: Module power supply – 5 VGND: GroundSLC: I2C ClockSDA: I2C dataYou can see pinout of this module in the image below. ...

SHT31 Temperature & Humidity Sensor Features SHT31 is a digital temperature and humidity sensor. This module uses I2C communication and there are two SCL and SDA pins that are needed to be hooked up in order to communicate to this sensor. This sensor is ideal for temperature and humidity sensing. Temperature measurement range: -40° +125°/ Accuracy ±0.3C° Humidity measuring range: 0-100% RH°/ Accuracy ±2% You can download the datasheet of this module here. [wpdm_package id=...

R308 Biometric Fingerprint Module Features R308 biometric fingerprint module is a high-precision, high-performance matching algorithm and high-capacity flash chip. It works based on fingerprint image processing, matching, memory search and performing and desired functions. It uses serial communication in order to communicate with microcontroller. The default Baud Rate is 57600, and it is not possible to change it. This module can store up to 500 fingerprints. You can down...

TM7711 24-bit Pressure Module Features The TM7711 is a 24-bit 2-channel analog-to-digital converter used to measure resistance changes. This module is widely used in load cell and air pressure sensors. This module features high accuracy, quality and cost-effectiveness. Note This module does not support I2C communication. You can download the datasheet of this module here. [wpdm_package id='18020'] TM7711 24-bit Pressure Module Pinout This sensor has 8 pins: VIN: Module power supply – 3.3-5...

GP2Y1010AU0F Dust Module Features The GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air. It is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems. You can download the datasheet of this module here.[wpdm_package id='18191'] ...

MQ-2 Smoke Gas Module Features MQ series sensor uses a small heater inside with an electrochemical sensor in order to measure a different kinds of gas combinations. They can be calibrated, but, in order to do that, a known concentration of measured gas or gases is necessary. Gas sensor is an indoor module and is used at room temperature. The MQ-2 sensor is suitable for the detection of butane, methane, alcoholic, LPG and smoke. It is also sensitive to ignition and combustion of gases. Note Afte...

MQ-7 Smoke Gas Module Features MQ series sensor uses a small heater inside with an electrochemical sensor in order to measure a different kinds of gas combinations. They can be calibrated, but, in order to do that, a known concentration of measured gas or gases is needed. Gas sensor is an indoor module and is used at room temperature. The MQ-7 sensor has high sensitivity to Carbon Monoxide and is able to detect the concentration of carbon monoxide in the air. The measurable concentration range of this s...